Polycom 3725-76302-001LI manual Join Supercluster Dialog Box, Column Description

DMA Operations Guide DMAs

Table 9-1Fields on the DMAs page

Column	Description
Host Name	Virtual host name of the cluster’s signaling interface.
IP Address	Virtual IP address of the clusters signaling interface.
Model	Type of system. Currently, only DMA 7000 systems may
	join a supercluster.
Version	Software version of the system.
RAS Port	The UDP port the cluster uses for H.323 RAS
	(Registration, Admission and Status) signaling.
SIP TCP Port	The TCP port number the cluster uses for SIP.
SIP UDP Port	The UDP port number the cluster uses for SIP.
SIP TLS Port	The TLS port number the cluster uses for SIP.
Status	Indicates whether the cluster is superclustered and
	whether it’s in service.
Time	The time and date that the status was checked.

See also:

“About Superclustering” on page 227 “Join Supercluster Dialog Box” on page 232 “Supercluster Procedures” on page 233

Join Supercluster Dialog Box

In the Supercluster page’s action list, the Join Supercluster command lets you add a Polycom DMA system to an existing supercluster or create a new one. It opens the Join Supercluster dialog box, where you can specify any cluster in the supercluster to join. If the cluster you specify isn’t already part of an existing supercluster, joining to it creates a new supercluster that gets its shared data store from the cluster you specify.

232 Polycom, Inc.