Information in the MCU list | Polycom 3725-76302-001LI instruction

DMA Operations Guide	MCUs

Table 6-1	Information in the MCU list

Column		Description

IP Addresses		The IP address for the MCU’s management interface (M)
		and signaling interface (S).

Signaling Type		The type of signaling for which the MCU is configured:
		H.323, SIP, or both.

Ports Reserved		The number of video and voice ports on the MCU that are
		reserved for the Polycom CMA system and therefore
		off-limits to the Polycom DMA system. Applies only to MCUs
		that are enabled for conference rooms (available as a
		conferencing resource for the Polycom DMA system’s
		Conference Manager).
		Reserving a portion of an MCU’s capacity for the Polycom
		CMA system enables that portion to be used for scheduled
		conferences (where MCU resources are reserved in
		advance).
		This feature is available only on RMX v. 6.0 or later MCUs
		and with a Polycom CMA system. It’s not available for use
		with a Polycom RealPresence Resource Manager system,
		which can’t share MCUs with the DMA system.

Prefix		The dialing prefix assigned to the MCU, if any. MCUs without
		a prefix are unavailable for direct prefix-based dialing.
		MCUs don’t need a prefix to be used as conferencing
		resources by the Conference Manager.

134	Polycom, Inc.

Image 146

Polycom 3725-76302-001LI manual Information in the MCU list

Contents

Polycom DMA 7000 System Operations Guide USA Contents Local Cluster Configuration Device Management MCU Management 131 Integrations with Other Systems 163 Conference Manager Configuration 193 Superclustering 227 Call Server Configuration 237 Site Topology 283 System Management and Maintenance 347 Users and Groups 311 Contents DMA Operations Guide System Reports 407 431 Index 539 Polycom DMA 7000 System Overview Introduction to the Polycom DMA System Call Server Polycom DMA System’s Primary FunctionsConference Manager RealPresence Platform API SVC Conferencing Support Polycom DMA System’s Three Configurations Two-server Cluster Configuration Single-server Configuration Superclustering System Port Usage See Signaling Settings onSystem Capabilities and Constraints Port Protocol Description Port Protocol Description See Security Settings on Be changed see Signaling Settings on Working in the Polycom DMA System Polycom Solution SupportAccessing the Polycom DMA System Field Input Requirements Settings Dialog BoxPolycom DMA System User Roles and Their Access Privileges DMA Operations Guide Working in the Polycom DMA System Menu/Icon Admin Provisioner Auditor Management interface access privileges API resource access privileges Conference Modifying Open Source Code Third-Party SoftwareOpen Source Software License Information Software Version License Link BSD Cddl NSS Nsis SAX UPX GPL Lzma Polycom DMA System Initial Configuration Summary Add Required DNS Records for the Polycom DMA System Additional DNS Records for SIP Proxy Additional DNS Records for H.323 Gatekeeper License the Polycom DMA System Verify That DNS Is Working for All Addresses Set Up Signaling Set Up Security Set Up MCUs DMA Operations Guide Set Up MCUs Set Up MCUs Polycom DMA System Initial Configuration Summary Connect to Microsoft Active Directory Set Up Conference Templates Test the System Test the System Security Certificates Overview How Certificates Work Forms of Certificates Accepted by the Polycom DMA System PEM Pkcs #7 How Certificates Are Used by the Polycom DMA System Certificate Settings Frequently Asked Questions Column Description Field Description Certificate Information Dialog BoxCertificate Signing Request Dialog Box Field Description Add Certificates Dialog BoxCertificate Details Dialog Box Certificate Procedures Section Description Actions list, select Add Certificates Install a Certificate Authority’s CertificateGo to Admin Local Cluster Certificates Create a Certificate Signing Request in the DMA System Actions list, select Create Certificate Signing Request Install a Certificate in the DMA System Actions list, select Add Certificates Remove a Certificate from the DMA System Actions list, select Delete Certificate Security Settings Custom security Field Description Maximum securityHigh security Https Field Description DMA system so that it trusts the CA Go to Admin Local Cluster Security Settings Consequences of Enabling Maximum Security Mode On the Troubleshooting Utilities menu, Top is removed DMA Operations Guide Login Policy Settings Local Password Session Field Description Password ManagementPassword Complexity Local User Account Field Description Account Lockout Banner Account Inactivity Reset System Passwords Reset System Passwords Local Cluster Configuration Network Settings Server Field Description Shared Management Turn on Auto-negotiation or set Speed and Duplex Management Network Settings , except that under Field Description Shared SignalingNetwork Settings General System Routing Configuration Dialog Box Time Settings Licenses FieldDescription Active License Field Description Activation Keys Signaling SettingsSIP Signaling Device Authentication Xmpp Signaling Dma1.polycom.com5223 Click Device authentication settings to go to Signaling Settings FieldsField Description Settings SIP Settings Click the Device authentication settings link to go to Xmpp Settings Entry see Edit Guest Port Dialog Box on page 78 or Then Require certificate validation for TLS is turned Signaling is turned off on the Security SettingsAdd Guest Port Dialog Box Edit Guest Port Dialog Box Add Guest Prefix Dialog Box Edit Guest Prefix Dialog Box Logging Settings Select Product Activation Local Cluster Configuration ProceduresAdd Licenses Click Generate Go to Admin Local Cluster Signaling Settings Configure SignalingGo to Admin Local Cluster Licenses Under Unauthorized ports, click Add Under Unauthorized prefixes, click Add Configure Logging Device Management Active Calls Information in the Active Calls list Call Details Dialog Box Tab/Field/Column Description Call Info Property Changes Tab/Field/Column Description BandwidthCall Events QoS Endpoints Information in the Endpoints list Column Description Command Description Takes you to Reports Registration History and displays Names/Aliases in a Mixed H.323 and SIP Environment Add Device Dialog Box Add Device dialog box Edit Device Dialog Box Edit Devices Dialog Box Add Alias Dialog Box Edit Alias Dialog Box Site Statistics Associate User Dialog Box Site Link Statistics External Gatekeeper Gatekeepers list Add External Gatekeeper Dialog BoxColumn Description External Gatekeeper Authentication Mode Apply the Resolve to external gatekeeper action Debugging Dialog Box for Preliminaries/Postliminaries Edit External Gatekeeper Dialog BoxColumn Description Postliminary Mode External SIP Peer Add External SIP Peer Dialog Box Field Description External SIP Peer Apply the Resolve to external SIP peer action, there is Domain List To header options Field Description PostliminaryUse customized script Template field Authentication Field Description AuthenticationDevice Authentication External Registration Edit External SIP Peer Dialog Box To this peer server for resolution Peer server to specific domains by adding Rule action, such as Resolve to external address , is 118 To Header Format Options Default To header for Microsoft. Equivalent to templateSIP Peer Postliminary Output Format Options Request-URI Header Format Options #orscheme##oruser#@#orhost# Variable Description Default Request-URI for Microsoft. Equivalent to templateFree Form Template Variables Displayname To Header and Request-URI Header ExamplesOriginal Template Result Sipuser@host Sipuser@peerHostIp Displayname Add Authentication Dialog Box Edit Authentication Dialog Box Add Outbound Registration Dialog Box Edit Outbound Registration Dialog Box 22Edit Outbound Registration dialog box External SBC Add External SBC Dialog Box Column Description External SBC Edit External SBC Dialog Box Rule or the Dial endpoints by IP address dial rule both 25Edit External SBC dialog box MCU Management MCUs DMA Operations Guide MCUs See SVC Conferencing Support on Information in the MCU list Command Description Unquarantine Add MCU Dialog Box Field Description External MCU MCU See Add Simplified Isdn Gateway Dialing Prefix Direct dial-in prefixsession profilePrefixdelimiterE.164 number Profile. See Isdn Gateway Selection Process on Postliminary Field Description Gateway ProfilesMedia IP Addresses Edit MCU Dialog Box Edit MCU dialog box Direct dial-in prefixsession profile Polycom, Inc 145 Add Session Profile Dialog Box Edit Session Profile Dialog Box Isdn Gateway Selection Process 148 MCU Procedures Go to Network MCU MCUs To edit an MCU To delete an MCU MCU Pools 7Information in the MCU Pools list Add MCU Pool Dialog Box Edit MCU Pool Dialog Box MCU Pool Procedures Go to Network MCU MCU Pools MCU Pool Orders 11Information in the MCU Pool Orders list Add MCU Pool Order Dialog Box Edit MCU Pool Order Dialog Box MCU Selection Process MCU Availability and Reliability Tracking + 5 *5/6 / 1 + 5 = 31/36 + 5 *1 / 1 + 5 =+ 5 *1 / 1 + 5 = 5/6 MCU Pool Order Procedures Go to Network MCU MCU Pool Orders Integrations with Other Systems Microsoft Active Directory Integration 164 Microsoft Active Directory Connection Status Conference Room Errors Report report Active Directory Connection Understanding Base DN on Field Description Enterprise Conference Room ID Generation Enterprise Chairperson and Conference Passcode Generation Active Directory Integration Procedure To integrate with Active Directory 170 Polycom, Inc 171 172 Understanding Base DN Use this Base DN To include the following Adding Passcodes for Enterprise Users Polycom, Inc 175 User Search When you click Update on the Microsoft Active DirectoryAbout the System’s Directory Queries Group Search Index used idxobjectCategory32561N Global Group Membership Search Attribute Replication Search Domain Search Configurable Attribute Domain SearchService Account Search Active Directory Microsoft Exchange Server Integration Microsoft Exchange Server Integration Microsoft Exchange Server Exchange Server Integration Procedure Go to Admin Integrations Microsoft Exchange Server Resource Management System Integration Resource Management System Join Resource Management System Dialog Box Resource Management System Integration Procedures Juniper Networks SRC Integration Juniper Networks SRC SRC IpipAddress=192.168.70.228 Juniper Networks SRC Integration ProcedureGo to Admin Integrations Juniper Networks SRC 192 Conference Manager Configuration Conference Settings Go to Admin Conference Manager Conference Settings Pool Orders on Standalone Templates Conference TemplatesTwo Types of Templates Templates Linked to RMX Profiles About Conference IVR Services Template Priority About Cascading Conference Templates List Field Description Common Settings Add Conference Template Dialog Box RMX General Settings Resource Management System Integration on LPR RMX Gathering Settings RMX Video Quality Not available if Presentation mode or Video switching RMX Video SettingsNot available if Video switching or Same layout is Telepresence mode is Yes RMX Audio Settings Select Layout Dialog Box on RMX Skins RMX Conference IVR Field Description RMX Recording Cisco Codian FECC/DTMF Edit Conference Template Dialog Box Field Description Common SettingsRMX General Settings 4Edit Conference Template dialog box 212 Polycom, Inc 213 214 Not available if Video switching is on or Telepresence 216 Polycom, Inc 217 Field Description Cisco Codian Select Layout Dialog Box Conference Templates Procedures Go to Admin Conference Manager Conference Templates Shared Number Dialing DMA Operations Guide Shared Number Dialing Add Virtual Entry Queue Dialog Box Add Direct Dial Virtual Entry Queue Dialog Box Edit Virtual Entry Queue Dialog Box Edit Direct Dial Virtual Entry Queue Dialog Box DMA Operations Guide Shared Number Dialing 226 Superclustering About Superclustering 228 DMAs DMA Operations Guide DMAs Following table describes the fields on Join Supercluster Dialog Box Supercluster Procedures Go to Network DMAs Actions list, click Join Supercluster To remove a cluster from the supercluster Actions list, select Remove from Supercluster 236 Call Server Configuration Consequences of Enabling Maximum Security Mode on About the Call Server Capabilities Call Server Settings External Gatekeeper on By alias dial rule see The Default Dial Plan Suggestions for Modifications on Larger than Timeout for call forwarding when no Answer Domains Authorized domains list Dial Rules Domain doesn’t match a Resolve to conference room 3Fields in the Dial Rules lists Test Dial Rules Dialog Box Sipsrbruce@10.47.7.9 Default Dial Plan and Suggestions for Modifications Rule Effect 248 Polycom, Inc 249 Preliminary Add Dial Rule Dialog BoxField Description Dial Rule Sample Preliminary and Postliminary Scripts on 7Dial rule actions Edit Dial Rule Dialog Box 9Dial rule actions Preliminary/Postliminary Scripting Variable Initial value Someone. Not a DMA Ms-forkingOUTPUTSIPHEADERSUser-Agent = OUTPUTSIPHEADERSSome-Custom-Header Dial Rule Action Output SIP Headers Script Debugging Dialog Box for Preliminaries/Postliminaries Dialstring = sipxxx@10.33.120.58 Sample Preliminary and Postliminary Scripts Add prefix 99 to the dial string 1234 Substitute Domain SIP Site Based Numeric Nicknames User = Callersitecountrycode + Callersiteareacode + user Hunt Groups Field Description General Info Add Hunt Group Dialog BoxEdit Hunt Group Dialog Box Hunt Group Members 15Edit Hunt Group dialog box On the Inbound Authentication tab, you can Device AuthenticationInbound Authentication Shared Outbound Authentication Field Description Inbound Authentication External SIP Peer Dialog Box on page 114 . If there is Add Device Authentication Dialog BoxShared Outbound Authentication Edit Device Authentication Dialog Box Field Description Device Authentication Registration Policy 19Fields on the Registration Policy Registration Policy Scripting Epdefinedincma EPISIPV4 Epversion Script Debugging Dialog Box for Registration Policy Scripts Sample Registration Policy Scripts If EPH323DIALEDDIGITSALIAS0.length!= Return Noncompliant Polycom, Inc 275 Prefix Service Add Simplified Isdn Gateway Dialing Prefix Dialog Box MCU Dialog Box on Edit Simplified Isdn Gateway Dialing Prefix Dialog Box Dialog Box on Edit Vertical Service Code Dialog Box Embedded DNS Following table describes the fields on the Embedded DNS Callservers.example.com Records see Registration History Report on History Retention SettingsCallserver-paris.callservers.example.com Conference History on Site Topology About Site Topology 284 Sites Device Types Site Information Dialog BoxField Description Site Info Add Site Dialog Box Field Description General Info General SettingsBandwidth Settings Subnets From the Endpoints page see Edit Device Dialog Box Field Description Territory SettingsIsdn Number Assignment Gateway Extension Dialing. Select this option if Isdn Outbound Dialing Routing Isdn Range Assignment for did dialing methodIsdn Range Assignment for gateway extension dialing method ALG SIP Routing Edit Site Dialog Box Field Description Isdn Number Assignment Gateway Extension Dialing . Select this option if Field Description Isdn Outbound Dialing Polycom, Inc 295 296 Add Subnet Dialog Box Edit Subnet Dialog Box Site Links Add Site Link Dialog Box Edit Site Link Dialog Box Go to Network Site Topology Site-to-Site Exclusions Site-to-Site ExclusionsAdd Site-to-Site Exclusion Wizard Territories Territory Summary Add Territory Dialog BoxColumn/Section Description Associated Sites pane FieldDescription Territory Info Edit Territory Dialog BoxAssociated Sites Network Clouds Site Link dialog box see Add Site Link Dialog Box on Add Network Cloud Dialog BoxField Description Cloud Info Go to Network Site Topology Sites Site Topology Configuration ProceduresEdit Network Cloud Dialog Box Go to Network Site Topology Territories About Site Topology on 310 Users and Groups User Roles Overview Role Description Adding Users Overview Users Following table describes the parts of the Users list Room of the user’s. See Edit Conference Room Dialog Add User Dialog Box CDR Select to open the Select Associated Endpoints Conference Settings onAssociated Endpoints Endpoints page see Associate User Dialog Box Field Description Associated Roles Conference Passcodes Edit User Dialog Box Polycom, Inc 321 Select Associated Endpoints Dialog Box Field Description Conference Passcodes Conference Rooms Dialog Box Pool Orders on Add Conference Room Dialog Box Conference Settings See Conference Settings on Conference Template Dialog Box on Edit Conference Room Dialog Box Call CDRs to this conference room System after this date Add Dial-out Participant Dialog Box Users Procedures Edit Dial-out Participant Dialog Box Go to User Users Conference Rooms Procedures To edit one of a user’s conference rooms To delete one of a user’s custom conference rooms Groups Endpoints on Import Enterprise Groups Dialog Box MCU Pool Orders on See also Users on page 314 Groups on Edit Group Dialog Box Conference Templates on Enterprise Groups Procedures Actions list, click Import Enterprise Groups Polycom, Inc 343 Login Sessions Change Password Dialog Box Local Password on 346 System Management Maintenance Management and Maintenance Overview Administrator Responsibilities Administrative Best Practices Auditor Best Practices Recommended Regular MaintenanceAuditor Responsibilities General system health and capacity checks Microsoft Active Directory health Dashboard Active Directory Integration Pane Call Server Active Calls Pane Call Server Registrations Pane Cluster Info Pane Conference Manager Usage Pane Conference History Max Participants PaneConference Manager MCUs Pane Exchange Server Integration Pane Resource Management System Integration Pane Signaling Settings PaneLicense Status Pane Territory Status Pane User Login History PaneSupercluster Status Pane Alerts Alert Hhmm GMT+/-HMM No clusters assigned to list of territories YYYY-MM-DD Hhmm GMT+/-HMM Active Directory Connection section 364 Polycom, Inc 365 366 Cluster cluster The server certificate has expired Cluster cluster One or more CA certificates have expired Cluster cluster a private network error exists on server Cluster cluster a management network error exists on server Polycom, Inc 371 Server server CPU utilization 50% and 75% Polycom, Inc 373 Cluster cluster Local users differ between servers MCU MCUname has count warnings No territories configured to host conference rooms System Log Files System Logs Procedures Actions list, click Download Active Logs To manually roll the system logs Traceroute Troubleshooting UtilitiesPing Top Stats Go to Maintenance Troubleshooting Utilities SARBacking Up and Restoring System may delete backups to free up disk space if necessary 3Information in the Backup and Restore list Actions list, click Download Selected Backup and Restore ProceduresGo to Maintenance Backup and Restore To upload a backup file Actions list, click Restore Selected Polycom, Inc 387 Upgrading the Software Following table describes the parts of the Software Upgrade Basic Upgrade Procedures Go to Maintenance Software Upgrade Return to Maintenance Software Upgrade To roll back an upgrade, restoring the previous version Polycom, Inc 393 394 Incompatible Software Version Supercluster Upgrades Factors to Consider for an Incremental Supercluster Upgrade Simplified Supercluster Upgrade Complete Service Outage 398 Polycom, Inc 399 400 Polycom, Inc 401 Complex Supercluster Upgrade Some Service Maintained Adding a Second Server Expanding an Unpatched System Expanding a Patched System Replacing a Failed Server Go to Maintenance Shutdown and Restart Shutting Down and Restarting System Reports Alert History Call History Export History Conference History Associated Calls Conference Events Exporting CDR Data Call Detail Records CDRsProperty Changes Call Record Layouts VEQ Call CDR Conference Record Layouts Conference Room Dialog Box on Conference Room Dialog Box on See Edit User Dialog Box onValue from the Conference room pass-through to Registration History Report Registration History Procedures Active Directory Integration Report Site could not be determined the system’s subnet Auto-discover failed or is disabled could beSelected on the Microsoft Active Directory Integration All Domains Partially loaded or Unable to load see Error Groups with Partially Loaded or No Membership Information Field Description Orphaned Groups Orphaned Groups and Users ProceduresOrphaned Groups and Users Report Orphaned Users Conference Room Errors Report 12Information in the Conference Room Errors list Enterprise Passcode Errors Report Exporting Conference Room Errors Data Information in the Enterprise Passcode Errors list Exporting Enterprise Passcode Errors Data Network Usage Report Exporting Network Usage Data Following table describes the fields in the records 14 Network Usage record layout To download network usage data DMA Operations Guide Network Usage Report 430 Polycom DMA System Snmp Support Snmp Overview Snmp Versions Supported Name Description Snmp SettingsList of Available Snmp MIBs System MIB on Setting Description See Snmp Versions Supported on page 432 for a Notification Users Notification Agents Add Notification User Dialog Box Snmp Versions Supported on 3Add Notification User dialog box Edit Notification User Dialog Box Add Notification Agent Dialog Box Edit Notification Agent Dialog Box Go to Admin Snmp Settings Click Download MIBs Snmp ProceduresGo to Admin Local Cluster Snmp Settings CfgProdInfoSWExtVerApplicationVersion Polycom DMA System MIBCfgProdInfoSWExtVerPlatformVersion CfgServer Polycom DMA System MIB 444 Polycom, Inc 445 446 Polycom, Inc 447 448 Polycom, Inc 449 TEXTUAL-CONVENTION, DisplayString, TruthValue, DateAndTime DmaConformanceDmaConformanceGroups From SNMPv2-TC Polycom, Inc Dma MODULE-IDENTITY201109220000Z Initial draft Information about the DMA product Dma.2Dma.2.1.1.1 CfgProductInfo Read-only Syntax GeneralString MAX-ACCESS read-only Status currentGeneralString = cfgProdInfoSWExtendedVersion Syntax CfgInterfacesEntry Not-accessible= cfgNetwork An entry in cfgInterfacesTable Polycom, Inc 455 Site topology configuration for the call server = cfgCsSupercluster = cfgCsTerritoriesEntry Dma.2.1.3.1.1.2.1.3 Configured territories= cfgCsSiteTopology = cfgCsIntDirSvcMSActiveDirectory Dma.2.1.3.1.2.1.1.3 Address of the Exchange server = cfgCsIntCalMSExchange Configurations for network integrations = cfgCsIntegrations Polycom, Inc 461 SIP signaling configuration for the cluster Current Description Contains status data for the DMA system = cfgCsSignalingDma.2.2 Dma.2.2.1 = stIdentity Sequence of StVersionEntry Syntax DisplayString MAX-ACCESS read-only Status currentDma.2.2.1.2.2 StVersionTable Status current Description An entry in stVersionTable Server statuses Sequence of StNetClusterAffiliationEntry = stNetwork Sequence of StNetPrivateInterfaceEntry Syntax StNetPrivateInterfaceEntry MAX-ACCESS not-accessibleDma.2.2.1.3.2 StNetPrivateInterfaceTable OBJECT-TYPE An entry in stNetPrivateInterfaceTable Polycom, Inc 469 Sequence of StNetManagementInterfaceEntry = stNetManagementInterfaceEntry DisplayString Sequence of StNetSignalingInterfaceEntry= stNetSignalingInterfaceEntry Dma.2.2.1.3.4.1.3 Sequence of StRsrcCPUUsageEntry Sequence of StRsrcMemoryUsageEntry Memory usage information for the servers StRsrcMemoryUsageEntry = Sequence = stResources= stRsrcMemoryUsageTable StRsrcMemUsageIndex Unsigned32 StRsrcMemUsageHostName Status current Description stRsrcSpaceTable index Sequence of StRsrcSwapSpaceEntrySwap Sequence of StRsrcDiskSpaceEntry Syntax StRsrcDiskSpaceEntry MAX-ACCESS not-accessible= stRsrcSwapSpaceEntry Disk Sequence of StRsrcLogSpaceEntry Syntax StRsrcLogSpaceEntry MAX-ACCESS not-accessible= stRsrcDiskSpaceEntry An entry in stRsrcLogSpaceTable Polycom, Inc 479 = stMCUs Syntax StMCUStatusEntry MAX-ACCESS not-accessibleSequence of StMCUStatusEntry An entry in stMCUStatusTable StMCUStServiceStatus Integer StMCUStIVRAvailable TruthValue Sequence of StMCUVideoPortUsageEntry = stMCUVideoPortUsageEntry Dma.2.2.2.1.3.1.3 Sequence of StMCUVoicePortUsageEntry 484 = stMCUsPerCluster = stMCUVoicePortUsageEntrySequence of StMCUPCConnectionStatusEntry StMCUPCConnStConnectionStatus Integer Sequence of StMCUPCReliabilityStatsEntry = stMCUPCReliabilityStatsEntry Value HundredthsDivided Sequence of StClustersEntry Sequence of StLicensesEntry Syntax StLicensesEntry MAX-ACCESS not-accessibleDma.2.2.3.2.1.3 StClClusterStatus OBJECT-TYPE Call server status shared across the supercluster = stCallserver Sequence of StCsConfMgrTerritoriesEntry = stCsIntDirSvcMSActiveDirectory Failed5, outdated6, failedNoSuchEnterpriseUser7Status of Active Directory caching Name of cluster performing AD caching TruthValue Syntax DateAndTime MAX-ACCESS read-only Status currentTrue if Exchange integration is enabled Status for site topology service integration = stCsIntCalMSExchange = stCsIntegrations Number of territories provided by the CMA system True if Juniper SRC integration is enabled = stCsIntNetBWMgmtJuniperSRC Dma.2.2.4.2.1.2.1.1 StCsCMMCUIndex Sequence of StCsConfMgrMCUsEntry= stCsConfMgrMCUs StCsConfMgrMCUsTable index Sequence of UseCHMaxPartsLast60MinutesEntry Syntax Unsigned32 MAX-ACCESS read-only Status currentDma.2.3.1.1.2 UseCHMaxPartsLast60MinutesTable OBJECT-TYPE One-minute intervals = useCHMaxPartsLast60MinutesTable UseCHMaxPartsLast60MinutesEntry = Sequence An entry in useCHMaxPartsLast24HoursTable Sequence of UseCHMaxPartsLast24HoursEntryOne-hour intervals UseCHMaxParts24HrMaxAdHocCalls Unsigned32 UseCHMaxParts24HrMaxPCOCalls Unsigned32 = useCHMaxPartsLast180DaysTable Dma.2.3.1.1.6 UseCHMaxPartsLast180DaysTable OBJECT-TYPESyntax UseCHMaxPartsLast180DaysEntry UseCHMaxParts180DaysTimestamp DateAndTime = useCHMaxPartsLast180DaysEntry = useCurrentConfsConfManagerUsage Dma.2.3.2.1.2 UseConfMgrUsageTable OBJECT-TYPESequence of UseConfMgrUsageEntry Polycom, Inc 505 Device registrations per cluster = useDevRegistrationsSequence of UseDevRegistrationsEntry Number of endpoints with an inactive registration status = useDevRegistrationsEntry Syntax AlActiveAlertsEntry MAX-ACCESS not-accessible = alActiveAlertsTable Polycom, Inc 509 Dma.2.5 DmaNotifications OBJECT-IDENTITY Status current Text= alActiveAlertsEntry Warn1, severe2, critical3 Accessible-for-notify NtfObjAlertID NtfObjAlertTimestamp NtfObjAlertCode 512 Polycom, Inc 513 514 Polycom, Inc 515 NtfObjAlertID NtfObjAlertTimestamp Polycom, Inc 517 518 Polycom, Inc 519 520 Polycom, Inc 521 522 Polycom, Inc 523 524 Polycom, Inc 525 526 Polycom, Inc 527 DMA Conformance CfgCallserver CfgCsSupercluster CfgCsCluster CfgCsSignaling CfgCsSgnlH323 StIdentity StHardwareInfoTable StNetSignalingInterfaceTable StNetSignalingInterfaceEntryDmaConformanceStatus OBJECT-GROUP Objects DmaStatus StVersionTable StVersionEntry StVerIndex StRsrcSwapSpaceTable StRsrcSwapSpaceEntry StRsrcSwapIndex StRsrcDiskSpaceTable StRsrcDiskSpaceEntry StRsrcDiskIndex StClustersTable StClustersEntry StCallserver StCsSupercluster Description Conformance group for dmaStatus = dmaConformanceGroups 534 Description Conformance group for dmaAlerts Description Conformance group for dmaUsage1.4 DmaConformanceAlerts OBJECT-GROUP 536 Module POLYCOM-DMA-MIB MANDATORY-GROUPS = dmaMonitoring1 538 Index 540 Polycom, Inc Index See MCU pool orders 543 Xmpp 545 Working in system Certificates 35 Xmpp signaling