Polycom 3725-76302-001LI manual Add Subnet Dialog Box

Sites Site Topology

Add Subnet Dialog Box

Lets you add subnets to the site you’re adding or editing. The following table describes the fields in the dialog box.

Table 11-5Add Subnet dialog box

Field	Description
Name	The name of the subnet. Required and must be unique.
IP address	The IP address that defines the subnet.
Subnet mask	The subnet mask, such as 255.255.255.0.
Max bandwidth (Mbps)	The total bandwidth limit for voice and video calls. If not
	specified, the site limit applies.
Max bit rate (kbps)	The per-call bit rate limit for voice and video calls. If not
	specified, the site limit applies.
	Note: Bit rate is not the same as bandwidth. Since the
	bit rate applies in both directions and there is overhead,
	the actual bandwidth consumed is about 2.5 times the
	bit rate selected.
	When you specify both the bandwidth and bit rate limits,
	the dialog box shows you how many calls at that bit rate
	the specified bandwidth supports.

Note

You can assign a subnet to only one site.

See also:

“Add Site Dialog Box” on page 287 “Edit Site Dialog Box” on page 292

“Site Topology Configuration Procedures” on page 307

Polycom, Inc. 297