Upgrading the Software System Management and Maintenance
Polycom, Inc. 393
3If this cluster is part of a supercluster and you’re rolling back after
rejoining the supercluster, do the following:
aIf integrated with a Polycom RealPresence Resource Manager or CMA
system, go to Admin > Integrations > Resource Management
System. and terminate the integration.
bGo to Network > Site Topology > Territories and reassign the
cluster’s territory responsibilities. Wait a few minutes and verify on
another cluster that the change has been replicated.
cGo to Network > DMAs and take it out of service (or busy it out and
wait for all calls to end).
dSelect this cluster and click Remove from Supercluster. When asked
to confirm that you want to remove the cluster, click Yes.
The cluster is removed from the supercluster. A dialog box informs
you when the process is complete. Then it logs you out and restarts.
eClick OK to log out immediately, or simply wait.
fLog back into the cluster you removed and verify on the Supercluster
Status pane of the Dashboard that the cluster is no longer part of the
supercluster.
gReturn to Maintenance > Software Upgrade.
4In the Actions list, click Roll Back.
A confirmation dialog box appears.
5Click Yes.
If a restart is required, a dialog box informs you that the downgrade is
starting. Shortly after that, the system logs you out and restarts.
6Click OK to log out immediately, or simply wait.
When the downgrade process is finished, in a two-server cluster, both
servers’ LCDs display DMA Clustered (in a single-server system, the LCD
displays DMA Ready), and you’re able to log back in.
Note
Wait about five minutes before trying to log back into the system. You may need to
restart your browser or flush your browser cache in order to do log back in.
Note
You may need to restart your browser or flush your browser cache in order to log
back into the system.