DMA Operations Guide

Sites

 

 

Edit Subnet Dialog Box

Lets you edit a subnet associated with a site. The following table describes the fields in the dialog box.

Table 11-6Edit Subnet dialog box

Field

Description

 

 

Name

The name of the subnet. Required and must be unique.

 

 

IP address

The IP address that defines the subnet.

 

 

Subnet mask

The subnet mask, such as 255.255.255.0.

 

 

Max bandwidth (Mbps)

The total bandwidth limit for voice and video calls. If not

 

specified, the site limit applies.

 

 

Max bit rate (kbps)

The per-call bit rate limit for voice and video calls. If not

 

specified, the site limit applies.

 

Note: Bit rate is not the same as bandwidth. Since the

 

bit rate applies in both directions and there is overhead,

 

the actual bandwidth consumed is about 2.5 times the

 

bit rate selected.

 

When you specify both the bandwidth and bit rate limits,

 

the dialog box shows you how many calls at that bit rate

 

the specified bandwidth supports.

 

 

Note

You can assign a subnet to only one site.

See also:

“Add Site Dialog Box” on page 287 “Edit Site Dialog Box” on page 292

“Site Topology Configuration Procedures” on page 307

298

Polycom, Inc.

Page 310
Image 310
Polycom 3725-76302-001LI manual Edit Subnet Dialog Box