Polycom 3725-76302-001LI manual Select Layout Dialog Box on, RMX Audio Settings

DMA Operations Guide Conference Templates

	Table 8-3	Add Conference Template dialog box (continued)
	Field		Description
	Auto layout		Lets the system select the video layout based on the
			number of participants in conference. Clear the check
			box to select a specific layout (below).
			Not available if Video switching is selected or
			Telepresence mode is Yes.
	Layout		With Auto layout deselected, this opens the Select
			Layout dialog box, where you can select the number
			and arrangement of video frames. Once a layout is
			chosen, a small representation of it appears here. See
			“Select Layout Dialog Box” on page 219.
			Not available if Video switching is selected.
	Telepresence mode		Support for telepresence conference rooms joining the
			conference:
			• Auto (default) — A conference is automatically put
			into telepresence mode when a telepresence
			endpoint (RPX, TPX, ATX, or OTX) joins.
			• Yes — Telepresence mode is on, regardless of
			whether a telepresence endpoint is present.
			• No — Telepresence mode is off, regardless of
			whether a telepresence endpoint is present.
			Available only on RMX v. 6.0 or later MCUs that are
			licensed for telepresence mode. We recommend always
			using Auto.
			Note: The RMX system flag ITP_CERTIFICATION must
			be set to YES. See the information about manually
			added system flags in the Polycom RMX Administrator’s
			Guide.
	Telepresence layout		Layout choices for telepresence conferences:
	mode		• Manual — Layout is controlled manually by a
			conference operator using the Multipoint Layout
			Application (MLA) interface.
			• Continuous Presence — Tells the MLA to generate
			a multipoint view (standard or custom).
			• Room Switch — Tells the MLA to use Voice
			Activated Room Switching (VARS). The speaker’s
			site is the only one seen by others.
			Not available if Telepresence mode is No. See the
			Polycom Multipoint Layout Application User Guide for
			more information about layouts.
	RMX Audio Settings
	Echo suppression		Enables the MCU to detect and suppress echo.
			Available only on MCUs with MPM+ or MPMx cards.
206			Polycom, Inc.