Field Description Gateway Profiles | Polycom 3725-76302-001LI

MCUs	MCU Management

Table 6-3	Add MCU dialog box

Field		Description

Gateway Profiles

Copy from entry for		Lets you copy the delimiter and session profiles from
ISDN gateway		another ISDN gateway instead of entering them below.
		This is especially useful for MGC devices because each
		ISDN network card must be registered separately, but
		all cards support the same gateway configuration.

Dial string delimiter		The dial string delimiter used to separate the session
		profile prefix from the ISDN E.164 number.

Session Profile table		Lists the defined session profile prefixes. A session
		profile prefix is a numeric dial string prefix that specifies
		a bit rate for the call and which protocols it supports.
		Click Add to add a session profile. Click Edit or Delete
		to change or delete the selected profile. You can’t
		change or delete session profiles that the MCU/gateway
		registered with, only those that you added.

Media IP Addresses

Add new media IP		If you specify the login information for the MCU, the
address		system can get media addresses from the MCU. If not,
		enter an IP address for media streams and click Add to
		add it the list below.

Media IP addresses		List of media addresses for the MCU.
		Click Remove to delete the selected address from the
		list.

Postliminary		A postliminary is an executable script, written in the
		Javascript language, that defines dial transformations to
		be applied before routing the call to the MCU/gateway.

Enabled		Lets you turn a postliminary on or off without deleting it.

Script		Type (or paste) the postliminary script you want to
		apply. Then click Debug this script to open the Script
		Debugging Dialog Box for Preliminaries/Postliminaries
		and test the script with various variables.

See also:

“MCUs” on page 131

“MCU Procedures” on page 149

“Add Session Profile Dialog Box” on page 146 “Edit Session Profile Dialog Box” on page 146

“Script Debugging Dialog Box for Preliminaries/Postliminaries” on page 257

Polycom, Inc.

141

Image 153

Polycom 3725-76302-001LI manual Field Description Gateway Profiles, Media IP Addresses, Postliminary

Contents

Polycom DMA 7000 System Operations Guide USA Contents Device Management Local Cluster Configuration Integrations with Other Systems 163 MCU Management 131 Superclustering 227 Conference Manager Configuration 193 Site Topology 283 Call Server Configuration 237 Users and Groups 311 System Management and Maintenance 347 Contents DMA Operations Guide 431 System Reports 407 Index 539 Introduction to the Polycom DMA System Polycom DMA 7000 System Overview Polycom DMA System’s Primary Functions Conference ManagerCall Server RealPresence Platform API SVC Conferencing Support Two-server Cluster Configuration Polycom DMA System’s Three Configurations Superclustering Single-server Configuration System Capabilities and Constraints See Signaling Settings onSystem Port Usage Port Protocol Description Port Protocol Description Be changed see Signaling Settings on See Security Settings on Polycom Solution Support Accessing the Polycom DMA SystemWorking in the Polycom DMA System Settings Dialog Box Polycom DMA System User Roles and Their Access PrivilegesField Input Requirements DMA Operations Guide Working in the Polycom DMA System Menu/Icon Admin Provisioner Auditor Management interface access privileges Conference API resource access privileges Open Source Software Third-Party SoftwareModifying Open Source Code License Information BSD Software Version License Link Cddl NSS Nsis SAX UPX GPL Lzma Polycom DMA System Initial Configuration Summary Add Required DNS Records for the Polycom DMA System Additional DNS Records for H.323 Gatekeeper Additional DNS Records for SIP Proxy Verify That DNS Is Working for All Addresses License the Polycom DMA System Set Up Signaling Set Up Security Set Up MCUs DMA Operations Guide Set Up MCUs Set Up MCUs Polycom DMA System Initial Configuration Summary Connect to Microsoft Active Directory Test the System Set Up Conference Templates Test the System How Certificates Work Security Certificates Overview PEM Pkcs #7 Forms of Certificates Accepted by the Polycom DMA System How Certificates Are Used by the Polycom DMA System Frequently Asked Questions Certificate Settings Column Description Certificate Information Dialog Box Certificate Signing Request Dialog BoxField Description Add Certificates Dialog Box Certificate Details Dialog BoxField Description Section Description Certificate Procedures Install a Certificate Authority’s Certificate Go to Admin Local Cluster CertificatesActions list, select Add Certificates Actions list, select Create Certificate Signing Request Create a Certificate Signing Request in the DMA System Install a Certificate in the DMA System Actions list, select Add Certificates Actions list, select Delete Certificate Remove a Certificate from the DMA System Security Settings Field Description Maximum security High securityCustom security Https Field Description DMA system so that it trusts the CA Go to Admin Local Cluster Security Settings Consequences of Enabling Maximum Security Mode On the Troubleshooting Utilities menu, Top is removed DMA Operations Guide Local Password Login Policy Settings Field Description Password Management Password ComplexitySession Field Description Account Lockout Local User Account Account Inactivity Banner Reset System Passwords Reset System Passwords Local Cluster Configuration Network Settings Server Turn on Auto-negotiation or set Speed and Duplex Field Description Shared Management Network Settings Field Description Shared SignalingManagement Network Settings , except that under General System Routing Configuration Dialog Box Time Settings FieldDescription Active License Licenses Signaling Settings SIP SignalingField Description Activation Keys Device Authentication Dma1.polycom.com5223 Xmpp Signaling Field Description Settings Signaling Settings FieldsClick Device authentication settings to go to SIP Settings Click the Device authentication settings link to go to Entry see Edit Guest Port Dialog Box on page 78 or Xmpp Settings Signaling is turned off on the Security Settings Add Guest Port Dialog BoxThen Require certificate validation for TLS is turned Edit Guest Port Dialog Box Add Guest Prefix Dialog Box Edit Guest Prefix Dialog Box Logging Settings Add Licenses Local Cluster Configuration ProceduresSelect Product Activation Click Generate Configure Signaling Go to Admin Local Cluster LicensesGo to Admin Local Cluster Signaling Settings Under Unauthorized ports, click Add Under Unauthorized prefixes, click Add Configure Logging Active Calls Device Management Information in the Active Calls list Tab/Field/Column Description Call Info Call Details Dialog Box Call Events Tab/Field/Column Description BandwidthProperty Changes QoS Endpoints Information in the Endpoints list Column Description Takes you to Reports Registration History and displays Command Description Names/Aliases in a Mixed H.323 and SIP Environment Add Device Dialog Box Add Device dialog box Edit Device Dialog Box Edit Devices Dialog Box Edit Alias Dialog Box Add Alias Dialog Box Associate User Dialog Box Site Statistics Site Link Statistics External Gatekeeper Add External Gatekeeper Dialog Box Column Description External GatekeeperGatekeepers list Apply the Resolve to external gatekeeper action Authentication Mode Edit External Gatekeeper Dialog Box Column Description PostliminaryDebugging Dialog Box for Preliminaries/Postliminaries Mode External SIP Peer Field Description External SIP Peer Add External SIP Peer Dialog Box Apply the Resolve to external SIP peer action, there is Domain List Use customized script Field Description PostliminaryTo header options Template field Device Authentication Field Description AuthenticationAuthentication External Registration Edit External SIP Peer Dialog Box To this peer server for resolution Peer server to specific domains by adding Rule action, such as Resolve to external address , is 118 Default To header for Microsoft. Equivalent to template SIP Peer Postliminary Output Format OptionsTo Header Format Options #orscheme##oruser#@#orhost# Request-URI Header Format Options Default Request-URI for Microsoft. Equivalent to template Free Form Template VariablesVariable Description Original Template Result To Header and Request-URI Header ExamplesDisplayname Sipuser@host Sipuser@peerHostIp Displayname Edit Authentication Dialog Box Add Authentication Dialog Box Add Outbound Registration Dialog Box Edit Outbound Registration Dialog Box 22Edit Outbound Registration dialog box External SBC Column Description External SBC Add External SBC Dialog Box Rule or the Dial endpoints by IP address dial rule both Edit External SBC Dialog Box 25Edit External SBC dialog box MCUs MCU Management DMA Operations Guide MCUs See SVC Conferencing Support on Information in the MCU list Command Description Unquarantine Add MCU Dialog Box Field Description External MCU MCU PrefixdelimiterE.164 number Direct dial-in prefixsession profileSee Add Simplified Isdn Gateway Dialing Prefix Profile. See Isdn Gateway Selection Process on Field Description Gateway Profiles Media IP AddressesPostliminary Edit MCU Dialog Box Edit MCU dialog box Direct dial-in prefixsession profile Polycom, Inc 145 Edit Session Profile Dialog Box Add Session Profile Dialog Box Isdn Gateway Selection Process 148 Go to Network MCU MCUs MCU Procedures To edit an MCU To delete an MCU MCU Pools 7Information in the MCU Pools list Edit MCU Pool Dialog Box Add MCU Pool Dialog Box Go to Network MCU MCU Pools MCU Pool Procedures MCU Pool Orders 11Information in the MCU Pool Orders list Edit MCU Pool Order Dialog Box Add MCU Pool Order Dialog Box MCU Selection Process MCU Availability and Reliability Tracking + 5 *1 / 1 + 5 = + 5 *1 / 1 + 5 = 5/6+ 5 *5/6 / 1 + 5 = 31/36 Go to Network MCU MCU Pool Orders MCU Pool Order Procedures Microsoft Active Directory Integration Integrations with Other Systems 164 Connection Status Microsoft Active Directory Active Directory Connection Conference Room Errors Report report Understanding Base DN on Enterprise Chairperson and Conference Passcode Generation Field Description Enterprise Conference Room ID Generation To integrate with Active Directory Active Directory Integration Procedure 170 Polycom, Inc 171 172 Use this Base DN To include the following Understanding Base DN Adding Passcodes for Enterprise Users Polycom, Inc 175 When you click Update on the Microsoft Active Directory About the System’s Directory QueriesUser Search Index used idxobjectCategory32561N Group Search Attribute Replication Search Global Group Membership Search Service Account Search Configurable Attribute Domain SearchDomain Search Active Directory Microsoft Exchange Server Integration Microsoft Exchange Server Integration Microsoft Exchange Server Exchange Server Integration Procedure Go to Admin Integrations Microsoft Exchange Server Resource Management System Integration Resource Management System Join Resource Management System Dialog Box Resource Management System Integration Procedures Juniper Networks SRC Integration SRC Juniper Networks SRC Juniper Networks SRC Integration Procedure Go to Admin Integrations Juniper Networks SRCIpipAddress=192.168.70.228 192 Conference Settings Conference Manager Configuration Pool Orders on Go to Admin Conference Manager Conference Settings Conference Templates Two Types of TemplatesStandalone Templates Templates Linked to RMX Profiles Template Priority About Conference IVR Services About Cascading Conference Templates List Add Conference Template Dialog Box Field Description Common Settings RMX General Settings Resource Management System Integration on LPR RMX Video Quality RMX Gathering Settings Not available if Video switching or Same layout is RMX Video SettingsNot available if Presentation mode or Video switching Telepresence mode is Yes Select Layout Dialog Box on RMX Audio Settings RMX Conference IVR RMX Skins Cisco Codian Field Description RMX Recording FECC/DTMF Field Description Common Settings RMX General SettingsEdit Conference Template Dialog Box 4Edit Conference Template dialog box 212 Polycom, Inc 213 214 Not available if Video switching is on or Telepresence 216 Polycom, Inc 217 Field Description Cisco Codian Select Layout Dialog Box Go to Admin Conference Manager Conference Templates Conference Templates Procedures Shared Number Dialing DMA Operations Guide Shared Number Dialing Add Virtual Entry Queue Dialog Box Add Direct Dial Virtual Entry Queue Dialog Box Edit Direct Dial Virtual Entry Queue Dialog Box Edit Virtual Entry Queue Dialog Box DMA Operations Guide Shared Number Dialing 226 About Superclustering Superclustering 228 DMAs DMA Operations Guide DMAs Following table describes the fields on Join Supercluster Dialog Box Go to Network DMAs Supercluster Procedures Actions list, click Join Supercluster Actions list, select Remove from Supercluster To remove a cluster from the supercluster 236 Call Server Configuration About the Call Server Capabilities Consequences of Enabling Maximum Security Mode on External Gatekeeper on Call Server Settings Suggestions for Modifications on By alias dial rule see The Default Dial Plan Answer Larger than Timeout for call forwarding when no Authorized domains list Domains Domain doesn’t match a Resolve to conference room Dial Rules 3Fields in the Dial Rules lists Sipsrbruce@10.47.7.9 Test Dial Rules Dialog Box Default Dial Plan and Suggestions for Modifications Rule Effect 248 Polycom, Inc 249 Field Description Dial Rule Add Dial Rule Dialog BoxPreliminary Sample Preliminary and Postliminary Scripts on 7Dial rule actions Edit Dial Rule Dialog Box 9Dial rule actions Variable Initial value Preliminary/Postliminary Scripting OUTPUTSIPHEADERSUser-Agent = Ms-forkingSomeone. Not a DMA OUTPUTSIPHEADERSSome-Custom-Header Dial Rule Action Output SIP Headers Dialstring = sipxxx@10.33.120.58 Script Debugging Dialog Box for Preliminaries/Postliminaries Add prefix 99 to the dial string 1234 Sample Preliminary and Postliminary Scripts Substitute Domain SIP User = Callersitecountrycode + Callersiteareacode + user Site Based Numeric Nicknames Hunt Groups Edit Hunt Group Dialog Box Add Hunt Group Dialog BoxField Description General Info Hunt Group Members 15Edit Hunt Group dialog box Device Authentication Inbound AuthenticationOn the Inbound Authentication tab, you can Field Description Inbound Authentication Shared Outbound Authentication Add Device Authentication Dialog Box Shared Outbound AuthenticationExternal SIP Peer Dialog Box on page 114 . If there is Field Description Device Authentication Edit Device Authentication Dialog Box Registration Policy 19Fields on the Registration Policy Epdefinedincma Registration Policy Scripting EPISIPV4 Epversion Sample Registration Policy Scripts Script Debugging Dialog Box for Registration Policy Scripts If EPH323DIALEDDIGITSALIAS0.length!= Return Noncompliant Polycom, Inc 275 Prefix Service MCU Dialog Box on Add Simplified Isdn Gateway Dialing Prefix Dialog Box Dialog Box on Edit Simplified Isdn Gateway Dialing Prefix Dialog Box Embedded DNS Edit Vertical Service Code Dialog Box Callservers.example.com Following table describes the fields on the Embedded DNS History Retention Settings Callserver-paris.callservers.example.comRecords see Registration History Report on Conference History on About Site Topology Site Topology 284 Sites Site Information Dialog Box Field Description Site InfoDevice Types Bandwidth Settings Field Description General Info General SettingsAdd Site Dialog Box Subnets Field Description Territory Settings Isdn Number AssignmentFrom the Endpoints page see Edit Device Dialog Box Isdn Outbound Dialing Gateway Extension Dialing. Select this option if Isdn Range Assignment for did dialing method Isdn Range Assignment for gateway extension dialing methodRouting SIP Routing ALG Edit Site Dialog Box Gateway Extension Dialing . Select this option if Field Description Isdn Number Assignment Field Description Isdn Outbound Dialing Polycom, Inc 295 296 Add Subnet Dialog Box Edit Subnet Dialog Box Add Site Link Dialog Box Site Links Edit Site Link Dialog Box Site-to-Site Exclusions Add Site-to-Site Exclusion WizardGo to Network Site Topology Site-to-Site Exclusions Territories Column/Section Description Add Territory Dialog BoxTerritory Summary Associated Sites pane Edit Territory Dialog Box Associated SitesFieldDescription Territory Info Network Clouds Add Network Cloud Dialog Box Field Description Cloud InfoSite Link dialog box see Add Site Link Dialog Box on Site Topology Configuration Procedures Edit Network Cloud Dialog BoxGo to Network Site Topology Sites Go to Network Site Topology Territories About Site Topology on 310 Users and Groups Role Description User Roles Overview Adding Users Overview Users Following table describes the parts of the Users list Room of the user’s. See Edit Conference Room Dialog CDR Add User Dialog Box Associated Endpoints Conference Settings onSelect to open the Select Associated Endpoints Endpoints page see Associate User Dialog Box Conference Passcodes Field Description Associated Roles Edit User Dialog Box Polycom, Inc 321 Field Description Conference Passcodes Select Associated Endpoints Dialog Box Conference Rooms Dialog Box Pool Orders on Add Conference Room Dialog Box Conference Settings See Conference Settings on Conference Template Dialog Box on Edit Conference Room Dialog Box Call CDRs to this conference room System after this date Add Dial-out Participant Dialog Box Edit Dial-out Participant Dialog Box Users Procedures Go to User Users Conference Rooms Procedures To edit one of a user’s conference rooms To delete one of a user’s custom conference rooms Endpoints on Groups MCU Pool Orders on Import Enterprise Groups Dialog Box See also Users on page 314 Groups on Conference Templates on Edit Group Dialog Box Actions list, click Import Enterprise Groups Enterprise Groups Procedures Polycom, Inc 343 Login Sessions Local Password on Change Password Dialog Box 346 Management and Maintenance Overview System Management Maintenance Administrative Best Practices Administrator Responsibilities Recommended Regular Maintenance Auditor ResponsibilitiesAuditor Best Practices General system health and capacity checks Microsoft Active Directory health Dashboard Call Server Active Calls Pane Active Directory Integration Pane Cluster Info Pane Call Server Registrations Pane Conference History Max Participants Pane Conference Manager MCUs PaneConference Manager Usage Pane Exchange Server Integration Pane Signaling Settings Pane License Status PaneResource Management System Integration Pane User Login History Pane Supercluster Status PaneTerritory Status Pane Alert Alerts Hhmm GMT+/-HMM No clusters assigned to list of territories YYYY-MM-DD Hhmm GMT+/-HMM Active Directory Connection section 364 Polycom, Inc 365 366 Cluster cluster The server certificate has expired Cluster cluster One or more CA certificates have expired Cluster cluster a private network error exists on server Cluster cluster a management network error exists on server Polycom, Inc 371 Server server CPU utilization 50% and 75% Polycom, Inc 373 Cluster cluster Local users differ between servers MCU MCUname has count warnings No territories configured to host conference rooms System Log Files Actions list, click Download Active Logs System Logs Procedures To manually roll the system logs Ping Troubleshooting UtilitiesTraceroute Top Go to Maintenance Troubleshooting Utilities SAR Backing Up and RestoringStats System may delete backups to free up disk space if necessary 3Information in the Backup and Restore list Backup and Restore Procedures Go to Maintenance Backup and RestoreActions list, click Download Selected To upload a backup file Actions list, click Restore Selected Polycom, Inc 387 Upgrading the Software Following table describes the parts of the Software Upgrade Go to Maintenance Software Upgrade Basic Upgrade Procedures Return to Maintenance Software Upgrade To roll back an upgrade, restoring the previous version Polycom, Inc 393 394 Incompatible Software Version Supercluster Upgrades Factors to Consider for an Incremental Supercluster Upgrade Simplified Supercluster Upgrade Complete Service Outage 398 Polycom, Inc 399 400 Polycom, Inc 401 Adding a Second Server Complex Supercluster Upgrade Some Service Maintained Expanding an Unpatched System Expanding a Patched System Replacing a Failed Server Shutting Down and Restarting Go to Maintenance Shutdown and Restart Alert History System Reports Call History Export History Conference History Conference Events Associated Calls Call Detail Records CDRs Property ChangesExporting CDR Data VEQ Call Record Layouts Call CDR Conference Room Dialog Box on Conference Record Layouts See Edit User Dialog Box on Value from the Conference room pass-through toConference Room Dialog Box on Registration History Report Active Directory Integration Report Registration History Procedures Selected on the Microsoft Active Directory Integration Auto-discover failed or is disabled could beSite could not be determined the system’s subnet All Domains Groups with Partially Loaded or No Membership Information Partially loaded or Unable to load see Error Orphaned Groups and Users Report Orphaned Groups and Users ProceduresField Description Orphaned Groups Orphaned Users Conference Room Errors Report 12Information in the Conference Room Errors list Exporting Conference Room Errors Data Enterprise Passcode Errors Report Information in the Enterprise Passcode Errors list Network Usage Report Exporting Enterprise Passcode Errors Data Following table describes the fields in the records Exporting Network Usage Data 14 Network Usage record layout To download network usage data DMA Operations Guide Network Usage Report 430 Snmp Overview Polycom DMA System Snmp Support Snmp Versions Supported List of Available Snmp MIBs Snmp SettingsName Description System MIB on See Snmp Versions Supported on page 432 for a Setting Description Notification Agents Notification Users Snmp Versions Supported on Add Notification User Dialog Box 3Add Notification User dialog box Edit Notification User Dialog Box Add Notification Agent Dialog Box Edit Notification Agent Dialog Box Snmp Procedures Go to Admin Local Cluster Snmp SettingsGo to Admin Snmp Settings Click Download MIBs CfgProdInfoSWExtVerPlatformVersion Polycom DMA System MIBCfgProdInfoSWExtVerApplicationVersion CfgServer Polycom DMA System MIB 444 Polycom, Inc 445 446 Polycom, Inc 447 448 Polycom, Inc 449 DmaConformanceGroups DmaConformanceTEXTUAL-CONVENTION, DisplayString, TruthValue, DateAndTime From SNMPv2-TC 201109220000Z Dma MODULE-IDENTITYPolycom, Inc Initial draft Dma.2 Dma.2.1.1.1 CfgProductInfoInformation about the DMA product GeneralString Syntax GeneralString MAX-ACCESS read-only Status currentRead-only = cfgProdInfoSWExtendedVersion = cfgNetwork Not-accessibleSyntax CfgInterfacesEntry An entry in cfgInterfacesTable Polycom, Inc 455 = cfgCsSupercluster Site topology configuration for the call server Configured territories = cfgCsSiteTopology= cfgCsTerritoriesEntry Dma.2.1.3.1.1.2.1.3 = cfgCsIntDirSvcMSActiveDirectory Dma.2.1.3.1.2.1.1.3 = cfgCsIntCalMSExchange Address of the Exchange server = cfgCsIntegrations Configurations for network integrations Polycom, Inc 461 SIP signaling configuration for the cluster Dma.2.2 = cfgCsSignalingCurrent Description Contains status data for the DMA system Dma.2.2.1 = stIdentity Dma.2.2.1.2.2 StVersionTable Syntax DisplayString MAX-ACCESS read-only Status currentSequence of StVersionEntry Status current Description An entry in stVersionTable Server statuses = stNetwork Sequence of StNetClusterAffiliationEntry Dma.2.2.1.3.2 StNetPrivateInterfaceTable OBJECT-TYPE Syntax StNetPrivateInterfaceEntry MAX-ACCESS not-accessibleSequence of StNetPrivateInterfaceEntry An entry in stNetPrivateInterfaceTable Polycom, Inc 469 Sequence of StNetManagementInterfaceEntry = stNetManagementInterfaceEntry Sequence of StNetSignalingInterfaceEntry = stNetSignalingInterfaceEntry Dma.2.2.1.3.4.1.3DisplayString Sequence of StRsrcCPUUsageEntry Memory usage information for the servers Sequence of StRsrcMemoryUsageEntry = stRsrcMemoryUsageTable = stResourcesStRsrcMemoryUsageEntry = Sequence StRsrcMemUsageIndex Unsigned32 StRsrcMemUsageHostName Sequence of StRsrcSwapSpaceEntry SwapStatus current Description stRsrcSpaceTable index = stRsrcSwapSpaceEntry Syntax StRsrcDiskSpaceEntry MAX-ACCESS not-accessibleSequence of StRsrcDiskSpaceEntry Disk = stRsrcDiskSpaceEntry Syntax StRsrcLogSpaceEntry MAX-ACCESS not-accessibleSequence of StRsrcLogSpaceEntry An entry in stRsrcLogSpaceTable Polycom, Inc 479 Sequence of StMCUStatusEntry Syntax StMCUStatusEntry MAX-ACCESS not-accessible= stMCUs An entry in stMCUStatusTable StMCUStIVRAvailable TruthValue StMCUStServiceStatus Integer = stMCUVideoPortUsageEntry Dma.2.2.2.1.3.1.3 Sequence of StMCUVideoPortUsageEntry Sequence of StMCUVoicePortUsageEntry 484 = stMCUVoicePortUsageEntry Sequence of StMCUPCConnectionStatusEntry= stMCUsPerCluster Sequence of StMCUPCReliabilityStatsEntry StMCUPCConnStConnectionStatus Integer = stMCUPCReliabilityStatsEntry Divided HundredthsValue Sequence of StClustersEntry Syntax StLicensesEntry MAX-ACCESS not-accessible Dma.2.2.3.2.1.3 StClClusterStatus OBJECT-TYPESequence of StLicensesEntry = stCallserver Call server status shared across the supercluster Sequence of StCsConfMgrTerritoriesEntry Status of Active Directory caching Failed5, outdated6, failedNoSuchEnterpriseUser7= stCsIntDirSvcMSActiveDirectory Name of cluster performing AD caching Syntax DateAndTime MAX-ACCESS read-only Status current True if Exchange integration is enabledTruthValue = stCsIntCalMSExchange Status for site topology service integration Number of territories provided by the CMA system = stCsIntegrations = stCsIntNetBWMgmtJuniperSRC True if Juniper SRC integration is enabled = stCsConfMgrMCUs Sequence of StCsConfMgrMCUsEntryDma.2.2.4.2.1.2.1.1 StCsCMMCUIndex StCsConfMgrMCUsTable index Dma.2.3.1.1.2 UseCHMaxPartsLast60MinutesTable OBJECT-TYPE Syntax Unsigned32 MAX-ACCESS read-only Status currentSequence of UseCHMaxPartsLast60MinutesEntry One-minute intervals UseCHMaxPartsLast60MinutesEntry = Sequence = useCHMaxPartsLast60MinutesTable One-hour intervals Sequence of UseCHMaxPartsLast24HoursEntryAn entry in useCHMaxPartsLast24HoursTable UseCHMaxParts24HrMaxAdHocCalls Unsigned32 UseCHMaxParts24HrMaxPCOCalls Unsigned32 Syntax UseCHMaxPartsLast180DaysEntry Dma.2.3.1.1.6 UseCHMaxPartsLast180DaysTable OBJECT-TYPE= useCHMaxPartsLast180DaysTable UseCHMaxParts180DaysTimestamp DateAndTime = useCHMaxPartsLast180DaysEntry Dma.2.3.2.1.2 UseConfMgrUsageTable OBJECT-TYPE Sequence of UseConfMgrUsageEntry= useCurrentConfsConfManagerUsage Polycom, Inc 505 = useDevRegistrations Sequence of UseDevRegistrationsEntryDevice registrations per cluster = useDevRegistrationsEntry Number of endpoints with an inactive registration status = alActiveAlertsTable Syntax AlActiveAlertsEntry MAX-ACCESS not-accessible Polycom, Inc 509 = alActiveAlertsEntry TextDma.2.5 DmaNotifications OBJECT-IDENTITY Status current Warn1, severe2, critical3 NtfObjAlertID NtfObjAlertTimestamp NtfObjAlertCode Accessible-for-notify 512 Polycom, Inc 513 514 Polycom, Inc 515 NtfObjAlertID NtfObjAlertTimestamp Polycom, Inc 517 518 Polycom, Inc 519 520 Polycom, Inc 521 522 Polycom, Inc 523 524 Polycom, Inc 525 526 Polycom, Inc 527 CfgCallserver CfgCsSupercluster DMA Conformance CfgCsCluster CfgCsSignaling CfgCsSgnlH323 DmaConformanceStatus OBJECT-GROUP Objects DmaStatus StNetSignalingInterfaceTable StNetSignalingInterfaceEntryStIdentity StHardwareInfoTable StVersionTable StVersionEntry StVerIndex StRsrcDiskSpaceTable StRsrcDiskSpaceEntry StRsrcDiskIndex StRsrcSwapSpaceTable StRsrcSwapSpaceEntry StRsrcSwapIndex StCallserver StCsSupercluster StClustersTable StClustersEntry = dmaConformanceGroups Description Conformance group for dmaStatus 534 Description Conformance group for dmaUsage 1.4 DmaConformanceAlerts OBJECT-GROUPDescription Conformance group for dmaAlerts 536 = dmaMonitoring1 Module POLYCOM-DMA-MIB MANDATORY-GROUPS 538 Index 540 Polycom, Inc Index See MCU pool orders 543 Xmpp 545 Working in system Certificates 35 Xmpp signaling