DMA OperationsGuide Users
318 Polycom, Inc.
Conference room
territory The territory to which the user’s conference rooms
(virtual meeting rooms, or VMRs) are assigned.
A conference room’s territory assignment determines
which DMA cluster hosts its conferences (the primary
cluster for the territory, or its backup cluster if
necessary).
If not selected, the user’s conference rooms are
assigned as follows (in priority order listed):
•To the territory associated with the room specifically
(see “Conference Rooms Dialog Box” on page323).
•Otherwise, to the territory associated with the AD
group the user belongs to (if more than one, the
lexically first group) (see “Edit Group Dialog Box” on
page341 ).
•Otherwise, the system’s default territory (see
“Conference Settings” on page 193).
Class of service Select to assign the user a class of service, which
determines the priority of the user’s calls.
If not selected, the user receives the highest class of
service associated with any group to which the user
belongs, or if none, the system’s default class of
service. See “Conference Settings” on page 193.
Note: A class of service may also be assigned to an
endpoint. See “Endpoints” on page91.
Maximum bit rate (kbps) If Class of service is selected, lets you specify the
maximum bit rate for the user.
Minimum downspeed
rate (kbps) If Class of service is selected, lets you specify the
minimum bit rate to which the user’s calls can be
reduced (downspeeded).
Associated Endpoints
Associated endpoints Lists the endpoints associated with the user. Click
Select to open the Select Associated Endpoints
dialog box and associate an endpoint with the user (see
“Select Associated Endpoints Dialog Box” on page 322).
Click Delete to delete an associated endpoint. A dialog
box prompts you to confirm.
Note: You can also manage endpoint associations on
the Endpoints page (see “Associate User Dialog Box”
on page101). But if the Polycom DMA system is
integrated with a Polycom RealPresence Resource
Manager or CMA system, it receives user-to-device
association information from that system, and you can
only associate users with devices on the Polycom
RealPresence Resource Manager or CMA system.
Table 12-3 Add User dialog box (continued)
Field Description