Polycom 3725-76302-001LI manual To delete an MCU

MCUs MCU Management

To delete an MCU

1On the Dashboard, verify that there are no calls and conferences on the MCU you want to delete.

2Go to Network > MCU > MCUs.

3In the MCUs list, select the MCU you want to remove from the Polycom DMA system’s pool of available conferencing resources.

4In the Actions list, select Delete.

5When asked to confirm that you want to delete the selected MCU, click Yes.

To immediately stop using one or more MCUs for conferencing and simplified

ISDN dialing

1Go to Network > MCU > MCUs.

2In the MCUs list, select the MCUs of interest.

3 In the Actions list, select Stop Using.

4 When asked to confirm that you want to stop using the MCUs, click Yes.

The Polycom DMA system immediately terminates all H.323 calls and conferences that it placed on those MCUs (for SIP calls only, it migrates the calls to in-service MCUs with available capacity). It also excludes these MCUs from consideration for any future conferences and simplified ISDN dialing calls.

This has no effect on the MCUs themselves, which continue to accept any calls from other sources.

To stop using one or more MCUs, but allow existing calls and conferences to continue

1Go to Network > MCU > MCUs.

2In the MCUs list, select the MCUs of interest.

3 In the Actions list, select Busy Out.

4 When asked to confirm that you want to busy out the MCUs, click Yes.

The Polycom DMA system stops creating new conferences on those MCUs, but it allows existing conferences to continue and accepts new calls to those conferences. It also excludes these MCUs from consideration for simplified ISDN dialing calls.

This has no effect on the MCUs themselves, which continue to accept any calls from other sources.

Polycom, Inc. 151