Polycom 3725-76302-001LI manual Field Description Shared Management

DMA Operations Guide Network Settings

Table 4-1Fields on the Network Settings page (continued)

Field	Description
Shared Management	The settings in this section apply to the entire system
Network Settings	(both servers in two-server configuration), whether
	management and signaling are combined or separate.
Virtual host name	Virtual host name and IP address(es) for the system’s
	management (or combined) network interface.
IPv4
	For a one-server configuration, these fields are
IPv6	disabled. (Exception: If only IPv6 is enabled, the system
	must have two addresses, so a single-server system
	must still have a virtual host name and IP address.)
	Host names may contain only letters, numbers, and
	internal dashes (hyphens), and may not include a
	domain. The reserved values appserv* and dmamgk-*
	may not be used for host names.
Subnet mask	IPv4 network mask that defines the subnetwork of the
	system’s management interface.
IPv6 prefix length	IPv6 CIDR (Classless Inter-Domain Routing) value that
	defines the subnetwork of the system’s management
	interface.
IPv4 gateway	IPv4 address of gateway server for the subnetwork.
Name	The name of the management network interface (eth0)
	is not editable, and it can’t be disabled.
Enable
	The eth0 interface corresponds with the GB1 jack on
	the server.
Auto-negotiation	Turn on Auto-negotiation or set Speed and Duplex
	manually.
Speed
Duplex
Show Link Details	Click to see details about link settings and information.
	This information may be useful to Polycom Global
	Services when troubleshooting a network issue.

66 Polycom, Inc.