Time Settings Local Cluster Configuration
Polycom, Inc. 69
When you add a routing rule, it appears in the table below the input fields.
Select a rule and click Delete selected route to delete it. Click Show raw
routing configuration to display the operating system’s underlying routing
configuration.
See also:
“Network Settings” on page 64
Time Settings The following table describes the fields on the Time Settings page. These
values are normally set in the USB Configuration Utility during system
installation and rarely need to be changed. See the Getting Started Guide.
Table 4-2 Routing Configuration dialog box
Field Description
Host/Network The IP address of the destination network host or
segment.
Prefix length The prefix length that, together with the Host/Network
address, defines the subnet for this route.
For IPv4, a prefix length of 24 is equivalent to specifying
a subnet mask of 255.255.255.0. A prefix length of 16 is
equivalent to specifying a subnet mask of 255.255.0.0.
Interface In split network configuration, select the interface for
this route.
Via IP address of router for this route. Optional, and only
needed for non-default routers.
Caution
Changing time settings requires a system restart and terminates all active
conferences.
You can’t change the system’s time settings while it’s integrated with a Polycom
RealPresence Resource Manager or CMA system or part of a supercluster. The
integration must first be terminated or the cluster removed from the supercluster.
See “Resource Management System Integration” on page 185 or “Superclustering”
on page227 .
We strongly recommend specifying NTP servers.