DMA OperationsGuide Dial Rules
246 Polycom, Inc.
See also:
“Dial Rules” on page 243
“Add Dial Rule Dialog Box” on page250
“Edit Dial Rule Dialog Box” on page252
“The Default Dial Plan and Suggestions for Modifications” on page246
“Preliminary/Postliminary Scripting” on page254
The Default Dial Plan and Suggestions for Modifications The Polycom DMA system is configured by default with a generic dial plan
that covers many common scenarios and may prove adequate for your needs.
It’s described in the table below.
Test route output Displays the results of applying each rule (including its
preliminary, if any) to the dial string. For instance,
testing the dial string example shown above against the
default dial plan might result in the following:
#1:SipAlias[sips:rbruce@10.47.7.9] is not
registered. H323-ID[rbruce] is not registered.
#2:The room [rbruce] does not exist.
#3:No entry queue is found.
#4:Domain [10.47.7.9] is not within our
administration.
#5:The call was accepted by this dial rule.
Final result Displays the final outcome of the dial rule processing.
The final outcome for the example above would be:
Transformed dial string is [sips:rbruce@10.47.7.9].
The call was accepted by dial rule #5.
Table 10-4 Test Dial Rules dialog box (continued)
Field Description