Polycom 3725-76302-001LI manual About Site Topology on

Site Topology Configuration Procedures Site Topology

dSelect the first site linked to this cloud and click the arrow button to move it to the Linked Sites list.

The Add Site Link dialog box appears.

eDefine the link. See “Add Site Link Dialog Box” on page 299.

fRepeat the previous two steps for each additional site linked to this cloud.

gClick OK.

8Go to Network > Site Topology > Site-to-Site Exclusions, and for each exclusion in your network topology, do the following:

a In the Actions list, click Add.

bComplete the Add Site-to-Site Exclusions wizard. See “Add Site-to-Site Exclusion Wizard” on page 301.

Your site topology information is complete. For conferences with cascading enabled, the Polycom DMA system can use it to route calls to the nearest eligible MCU (based on pools and pool orders) that has available capacity and to create the cascade links between MCUs.

Note

If in the future, you integrate this system with a Polycom RealPresence Resource Manager or CMA system, the site topology information from the Polycom RealPresence Resource Manager or CMA system will replace the information you entered.

See also:

“About Site Topology” on page 283

Polycom, Inc. 309