Backing Up and Restoring System Management and Maintenance
Polycom, Inc. 387
5In the DMA USB Configuration Utility window, click Copy a Backup to
the USB Stick.
6Select the backup file from which you want to restore the system and
click Open.
The utility displays an error message if the file isn’t a valid Polycom DMA
system backup. Otherwise, it confirms that the backup file is in place.
The utility’s main window states that The USB stick is ready to restore
the system from a backup file. At the bottom of the window, it displays
information about the selected backup file.
7Close the utility.
8In your system tray, click Safely Remove Hardware and select Safely
Remove USB Mass Storage Device. When a message tells you it’s safe to
do so, disconnect the USB memory stick from the PC and take it to the data
center housing the Polycom DMA system server(s).
Note
If autorun doesn’t work or is turned off, navigate to the USB memory stick using My
Computer, Windows Explorer, or another file manager. Then start the Configuration
Utility by double-clicking
dma7000-usb-config.exe
.