Mcu | Polycom 3725-76302-001LI instruction

MCUs	MCU Management

Table 6-3	Add MCU dialog box

Field		Description

Voice ports reserved for		The number of voice ports on this MCU that are
CMA system		off-limits to the Polycom DMA system.
		Set this to the number of ports you want to reserve for
		your Polycom CMA system to use for scheduled
		conferences (requires RMX v6.0 or later).
		Note: This feature is not for use with a Polycom
		RealPresence Resource Manager system. The
		RealPresence Resource Manager system must have
		exclusive use of any MCUs on which it directly
		schedules conferences. Those MCUs should not be
		added to the DMA system’s conferencing resources.

Strip prefix		If selected, the DMA system strips the prefix when a call
		that includes a prefix is routed to this MCU.

Direct dial in prefix		The dialing prefix assigned to the MCU, if any. MCUs
		without a prefix are unavailable for direct prefix-based
		dialing.
		MCUs don’t need a prefix to be used as conferencing
		resources by the Conference Manager.
		Gateways don’t need a direct dial-in prefix if you define
		simplified ISDN gateway dialing prefixes so that the
		DMA system can choose from a pool of available
		gateways (see “Add Simplified ISDN Gateway Dialing
		Prefix Dialog Box” on page 277).

Signaling address for		The address that the MCU uses for H.323 signaling. If
H.323		you specify the login information for the MCU, this field
		is optional (the system can get the address from the
		MCU). If not, and H.323 is enabled, this field is required.

Signaling address for		The address that the MCU uses for SIP signaling. If you
SIP		specify the login information for the MCU, this field is
		optional (the system can get the address from the
		MCU). If not, and SIP is enabled, this field is required.

Transport type		The SIP transport type to use with this MCU. If the
		Polycom DMA system‘s security settings don’t allow
		unencrypted connections, this must be TLS.

Signaling type		Select SIP, H.323, or both, depending on the
		configuration of the Polycom DMA system and the
		MCU.

Polycom, Inc.

139

Image 151

Polycom 3725-76302-001LI manual Mcu

Contents

Polycom DMA 7000 System Operations Guide USA Contents Device Management Local Cluster Configuration Integrations with Other Systems 163 MCU Management 131 Superclustering 227 Conference Manager Configuration 193 Site Topology 283 Call Server Configuration 237 Users and Groups 311 System Management and Maintenance 347 Contents DMA Operations Guide 431 System Reports 407 Index 539 Introduction to the Polycom DMA System Polycom DMA 7000 System Overview Conference Manager Polycom DMA System’s Primary FunctionsCall Server RealPresence Platform API SVC Conferencing Support Two-server Cluster Configuration Polycom DMA System’s Three Configurations Superclustering Single-server Configuration Port Protocol Description See Signaling Settings onSystem Capabilities and Constraints System Port Usage Port Protocol Description Be changed see Signaling Settings on See Security Settings on Accessing the Polycom DMA System Polycom Solution SupportWorking in the Polycom DMA System Polycom DMA System User Roles and Their Access Privileges Settings Dialog BoxField Input Requirements DMA Operations Guide Working in the Polycom DMA System Menu/Icon Admin Provisioner Auditor Management interface access privileges Conference API resource access privileges License Information Third-Party SoftwareOpen Source Software Modifying Open Source Code BSD Software Version License Link Cddl NSS Nsis SAX UPX GPL Lzma Polycom DMA System Initial Configuration Summary Add Required DNS Records for the Polycom DMA System Additional DNS Records for H.323 Gatekeeper Additional DNS Records for SIP Proxy Verify That DNS Is Working for All Addresses License the Polycom DMA System Set Up Signaling Set Up Security Set Up MCUs DMA Operations Guide Set Up MCUs Set Up MCUs Polycom DMA System Initial Configuration Summary Connect to Microsoft Active Directory Test the System Set Up Conference Templates Test the System How Certificates Work Security Certificates Overview PEM Pkcs #7 Forms of Certificates Accepted by the Polycom DMA System How Certificates Are Used by the Polycom DMA System Frequently Asked Questions Certificate Settings Column Description Certificate Signing Request Dialog Box Certificate Information Dialog BoxField Description Certificate Details Dialog Box Add Certificates Dialog BoxField Description Section Description Certificate Procedures Go to Admin Local Cluster Certificates Install a Certificate Authority’s CertificateActions list, select Add Certificates Actions list, select Create Certificate Signing Request Create a Certificate Signing Request in the DMA System Install a Certificate in the DMA System Actions list, select Add Certificates Actions list, select Delete Certificate Remove a Certificate from the DMA System Security Settings High security Field Description Maximum securityCustom security Https Field Description DMA system so that it trusts the CA Go to Admin Local Cluster Security Settings Consequences of Enabling Maximum Security Mode On the Troubleshooting Utilities menu, Top is removed DMA Operations Guide Local Password Login Policy Settings Password Complexity Field Description Password ManagementSession Field Description Account Lockout Local User Account Account Inactivity Banner Reset System Passwords Reset System Passwords Local Cluster Configuration Network Settings Server Turn on Auto-negotiation or set Speed and Duplex Field Description Shared Management General System Field Description Shared SignalingNetwork Settings Management Network Settings , except that under Routing Configuration Dialog Box Time Settings FieldDescription Active License Licenses SIP Signaling Signaling SettingsField Description Activation Keys Device Authentication Dma1.polycom.com5223 Xmpp Signaling SIP Settings Signaling Settings FieldsField Description Settings Click Device authentication settings to go to Click the Device authentication settings link to go to Entry see Edit Guest Port Dialog Box on page 78 or Xmpp Settings Add Guest Port Dialog Box Signaling is turned off on the Security SettingsThen Require certificate validation for TLS is turned Edit Guest Port Dialog Box Add Guest Prefix Dialog Box Edit Guest Prefix Dialog Box Logging Settings Click Generate Local Cluster Configuration ProceduresAdd Licenses Select Product Activation Go to Admin Local Cluster Licenses Configure SignalingGo to Admin Local Cluster Signaling Settings Under Unauthorized ports, click Add Under Unauthorized prefixes, click Add Configure Logging Active Calls Device Management Information in the Active Calls list Tab/Field/Column Description Call Info Call Details Dialog Box QoS Tab/Field/Column Description BandwidthCall Events Property Changes Endpoints Information in the Endpoints list Column Description Takes you to Reports Registration History and displays Command Description Names/Aliases in a Mixed H.323 and SIP Environment Add Device Dialog Box Add Device dialog box Edit Device Dialog Box Edit Devices Dialog Box Edit Alias Dialog Box Add Alias Dialog Box Associate User Dialog Box Site Statistics Site Link Statistics External Gatekeeper Column Description External Gatekeeper Add External Gatekeeper Dialog BoxGatekeepers list Apply the Resolve to external gatekeeper action Authentication Mode Column Description Postliminary Edit External Gatekeeper Dialog BoxDebugging Dialog Box for Preliminaries/Postliminaries Mode External SIP Peer Field Description External SIP Peer Add External SIP Peer Dialog Box Apply the Resolve to external SIP peer action, there is Domain List Template field Field Description PostliminaryUse customized script To header options External Registration Field Description AuthenticationDevice Authentication Authentication Edit External SIP Peer Dialog Box To this peer server for resolution Peer server to specific domains by adding Rule action, such as Resolve to external address , is 118 SIP Peer Postliminary Output Format Options Default To header for Microsoft. Equivalent to templateTo Header Format Options #orscheme##oruser#@#orhost# Request-URI Header Format Options Free Form Template Variables Default Request-URI for Microsoft. Equivalent to templateVariable Description Sipuser@host Sipuser@peerHostIp Displayname To Header and Request-URI Header ExamplesOriginal Template Result Displayname Edit Authentication Dialog Box Add Authentication Dialog Box Add Outbound Registration Dialog Box Edit Outbound Registration Dialog Box 22Edit Outbound Registration dialog box External SBC Column Description External SBC Add External SBC Dialog Box Rule or the Dial endpoints by IP address dial rule both Edit External SBC Dialog Box 25Edit External SBC dialog box MCUs MCU Management DMA Operations Guide MCUs See SVC Conferencing Support on Information in the MCU list Command Description Unquarantine Add MCU Dialog Box Field Description External MCU MCU Profile. See Isdn Gateway Selection Process on Direct dial-in prefixsession profilePrefixdelimiterE.164 number See Add Simplified Isdn Gateway Dialing Prefix Media IP Addresses Field Description Gateway ProfilesPostliminary Edit MCU Dialog Box Edit MCU dialog box Direct dial-in prefixsession profile Polycom, Inc 145 Edit Session Profile Dialog Box Add Session Profile Dialog Box Isdn Gateway Selection Process 148 Go to Network MCU MCUs MCU Procedures To edit an MCU To delete an MCU MCU Pools 7Information in the MCU Pools list Edit MCU Pool Dialog Box Add MCU Pool Dialog Box Go to Network MCU MCU Pools MCU Pool Procedures MCU Pool Orders 11Information in the MCU Pool Orders list Edit MCU Pool Order Dialog Box Add MCU Pool Order Dialog Box MCU Selection Process MCU Availability and Reliability Tracking + 5 *1 / 1 + 5 = 5/6 + 5 *1 / 1 + 5 =+ 5 *5/6 / 1 + 5 = 31/36 Go to Network MCU MCU Pool Orders MCU Pool Order Procedures Microsoft Active Directory Integration Integrations with Other Systems 164 Connection Status Microsoft Active Directory Active Directory Connection Conference Room Errors Report report Understanding Base DN on Enterprise Chairperson and Conference Passcode Generation Field Description Enterprise Conference Room ID Generation To integrate with Active Directory Active Directory Integration Procedure 170 Polycom, Inc 171 172 Use this Base DN To include the following Understanding Base DN Adding Passcodes for Enterprise Users Polycom, Inc 175 About the System’s Directory Queries When you click Update on the Microsoft Active DirectoryUser Search Index used idxobjectCategory32561N Group Search Attribute Replication Search Global Group Membership Search Active Directory Configurable Attribute Domain SearchService Account Search Domain Search Microsoft Exchange Server Integration Microsoft Exchange Server Integration Microsoft Exchange Server Exchange Server Integration Procedure Go to Admin Integrations Microsoft Exchange Server Resource Management System Integration Resource Management System Join Resource Management System Dialog Box Resource Management System Integration Procedures Juniper Networks SRC Integration SRC Juniper Networks SRC Go to Admin Integrations Juniper Networks SRC Juniper Networks SRC Integration ProcedureIpipAddress=192.168.70.228 192 Conference Settings Conference Manager Configuration Pool Orders on Go to Admin Conference Manager Conference Settings Two Types of Templates Conference TemplatesStandalone Templates Templates Linked to RMX Profiles Template Priority About Conference IVR Services About Cascading Conference Templates List Add Conference Template Dialog Box Field Description Common Settings RMX General Settings Resource Management System Integration on LPR RMX Video Quality RMX Gathering Settings Telepresence mode is Yes RMX Video SettingsNot available if Video switching or Same layout is Not available if Presentation mode or Video switching Select Layout Dialog Box on RMX Audio Settings RMX Conference IVR RMX Skins Cisco Codian Field Description RMX Recording FECC/DTMF RMX General Settings Field Description Common SettingsEdit Conference Template Dialog Box 4Edit Conference Template dialog box 212 Polycom, Inc 213 214 Not available if Video switching is on or Telepresence 216 Polycom, Inc 217 Field Description Cisco Codian Select Layout Dialog Box Go to Admin Conference Manager Conference Templates Conference Templates Procedures Shared Number Dialing DMA Operations Guide Shared Number Dialing Add Virtual Entry Queue Dialog Box Add Direct Dial Virtual Entry Queue Dialog Box Edit Direct Dial Virtual Entry Queue Dialog Box Edit Virtual Entry Queue Dialog Box DMA Operations Guide Shared Number Dialing 226 About Superclustering Superclustering 228 DMAs DMA Operations Guide DMAs Following table describes the fields on Join Supercluster Dialog Box Go to Network DMAs Supercluster Procedures Actions list, click Join Supercluster Actions list, select Remove from Supercluster To remove a cluster from the supercluster 236 Call Server Configuration About the Call Server Capabilities Consequences of Enabling Maximum Security Mode on External Gatekeeper on Call Server Settings Suggestions for Modifications on By alias dial rule see The Default Dial Plan Answer Larger than Timeout for call forwarding when no Authorized domains list Domains Domain doesn’t match a Resolve to conference room Dial Rules 3Fields in the Dial Rules lists Sipsrbruce@10.47.7.9 Test Dial Rules Dialog Box Default Dial Plan and Suggestions for Modifications Rule Effect 248 Polycom, Inc 249 Sample Preliminary and Postliminary Scripts on Add Dial Rule Dialog BoxField Description Dial Rule Preliminary 7Dial rule actions Edit Dial Rule Dialog Box 9Dial rule actions Variable Initial value Preliminary/Postliminary Scripting OUTPUTSIPHEADERSSome-Custom-Header Ms-forkingOUTPUTSIPHEADERSUser-Agent = Someone. Not a DMA Dial Rule Action Output SIP Headers Dialstring = sipxxx@10.33.120.58 Script Debugging Dialog Box for Preliminaries/Postliminaries Add prefix 99 to the dial string 1234 Sample Preliminary and Postliminary Scripts Substitute Domain SIP User = Callersitecountrycode + Callersiteareacode + user Site Based Numeric Nicknames Hunt Groups Hunt Group Members Add Hunt Group Dialog BoxEdit Hunt Group Dialog Box Field Description General Info 15Edit Hunt Group dialog box Inbound Authentication Device AuthenticationOn the Inbound Authentication tab, you can Field Description Inbound Authentication Shared Outbound Authentication Shared Outbound Authentication Add Device Authentication Dialog BoxExternal SIP Peer Dialog Box on page 114 . If there is Field Description Device Authentication Edit Device Authentication Dialog Box Registration Policy 19Fields on the Registration Policy Epdefinedincma Registration Policy Scripting EPISIPV4 Epversion Sample Registration Policy Scripts Script Debugging Dialog Box for Registration Policy Scripts If EPH323DIALEDDIGITSALIAS0.length!= Return Noncompliant Polycom, Inc 275 Prefix Service MCU Dialog Box on Add Simplified Isdn Gateway Dialing Prefix Dialog Box Dialog Box on Edit Simplified Isdn Gateway Dialing Prefix Dialog Box Embedded DNS Edit Vertical Service Code Dialog Box Callservers.example.com Following table describes the fields on the Embedded DNS Callserver-paris.callservers.example.com History Retention SettingsRecords see Registration History Report on Conference History on About Site Topology Site Topology 284 Sites Field Description Site Info Site Information Dialog BoxDevice Types Subnets Field Description General Info General SettingsBandwidth Settings Add Site Dialog Box Isdn Number Assignment Field Description Territory SettingsFrom the Endpoints page see Edit Device Dialog Box Isdn Outbound Dialing Gateway Extension Dialing. Select this option if Isdn Range Assignment for gateway extension dialing method Isdn Range Assignment for did dialing methodRouting SIP Routing ALG Edit Site Dialog Box Gateway Extension Dialing . Select this option if Field Description Isdn Number Assignment Field Description Isdn Outbound Dialing Polycom, Inc 295 296 Add Subnet Dialog Box Edit Subnet Dialog Box Add Site Link Dialog Box Site Links Edit Site Link Dialog Box Add Site-to-Site Exclusion Wizard Site-to-Site ExclusionsGo to Network Site Topology Site-to-Site Exclusions Territories Associated Sites pane Add Territory Dialog BoxColumn/Section Description Territory Summary Associated Sites Edit Territory Dialog BoxFieldDescription Territory Info Network Clouds Field Description Cloud Info Add Network Cloud Dialog BoxSite Link dialog box see Add Site Link Dialog Box on Edit Network Cloud Dialog Box Site Topology Configuration ProceduresGo to Network Site Topology Sites Go to Network Site Topology Territories About Site Topology on 310 Users and Groups Role Description User Roles Overview Adding Users Overview Users Following table describes the parts of the Users list Room of the user’s. See Edit Conference Room Dialog CDR Add User Dialog Box Endpoints page see Associate User Dialog Box Conference Settings onAssociated Endpoints Select to open the Select Associated Endpoints Conference Passcodes Field Description Associated Roles Edit User Dialog Box Polycom, Inc 321 Field Description Conference Passcodes Select Associated Endpoints Dialog Box Conference Rooms Dialog Box Pool Orders on Add Conference Room Dialog Box Conference Settings See Conference Settings on Conference Template Dialog Box on Edit Conference Room Dialog Box Call CDRs to this conference room System after this date Add Dial-out Participant Dialog Box Edit Dial-out Participant Dialog Box Users Procedures Go to User Users Conference Rooms Procedures To edit one of a user’s conference rooms To delete one of a user’s custom conference rooms Endpoints on Groups MCU Pool Orders on Import Enterprise Groups Dialog Box See also Users on page 314 Groups on Conference Templates on Edit Group Dialog Box Actions list, click Import Enterprise Groups Enterprise Groups Procedures Polycom, Inc 343 Login Sessions Local Password on Change Password Dialog Box 346 Management and Maintenance Overview System Management Maintenance Administrative Best Practices Administrator Responsibilities Auditor Responsibilities Recommended Regular MaintenanceAuditor Best Practices General system health and capacity checks Microsoft Active Directory health Dashboard Call Server Active Calls Pane Active Directory Integration Pane Cluster Info Pane Call Server Registrations Pane Conference Manager MCUs Pane Conference History Max Participants PaneConference Manager Usage Pane Exchange Server Integration Pane License Status Pane Signaling Settings PaneResource Management System Integration Pane Supercluster Status Pane User Login History PaneTerritory Status Pane Alert Alerts Hhmm GMT+/-HMM No clusters assigned to list of territories YYYY-MM-DD Hhmm GMT+/-HMM Active Directory Connection section 364 Polycom, Inc 365 366 Cluster cluster The server certificate has expired Cluster cluster One or more CA certificates have expired Cluster cluster a private network error exists on server Cluster cluster a management network error exists on server Polycom, Inc 371 Server server CPU utilization 50% and 75% Polycom, Inc 373 Cluster cluster Local users differ between servers MCU MCUname has count warnings No territories configured to host conference rooms System Log Files Actions list, click Download Active Logs System Logs Procedures To manually roll the system logs Top Troubleshooting UtilitiesPing Traceroute Backing Up and Restoring Go to Maintenance Troubleshooting Utilities SARStats System may delete backups to free up disk space if necessary 3Information in the Backup and Restore list Go to Maintenance Backup and Restore Backup and Restore ProceduresActions list, click Download Selected To upload a backup file Actions list, click Restore Selected Polycom, Inc 387 Upgrading the Software Following table describes the parts of the Software Upgrade Go to Maintenance Software Upgrade Basic Upgrade Procedures Return to Maintenance Software Upgrade To roll back an upgrade, restoring the previous version Polycom, Inc 393 394 Incompatible Software Version Supercluster Upgrades Factors to Consider for an Incremental Supercluster Upgrade Simplified Supercluster Upgrade Complete Service Outage 398 Polycom, Inc 399 400 Polycom, Inc 401 Adding a Second Server Complex Supercluster Upgrade Some Service Maintained Expanding an Unpatched System Expanding a Patched System Replacing a Failed Server Shutting Down and Restarting Go to Maintenance Shutdown and Restart Alert History System Reports Call History Export History Conference History Conference Events Associated Calls Property Changes Call Detail Records CDRsExporting CDR Data VEQ Call Record Layouts Call CDR Conference Room Dialog Box on Conference Record Layouts Value from the Conference room pass-through to See Edit User Dialog Box onConference Room Dialog Box on Registration History Report Active Directory Integration Report Registration History Procedures All Domains Auto-discover failed or is disabled could beSelected on the Microsoft Active Directory Integration Site could not be determined the system’s subnet Groups with Partially Loaded or No Membership Information Partially loaded or Unable to load see Error Orphaned Users Orphaned Groups and Users ProceduresOrphaned Groups and Users Report Field Description Orphaned Groups Conference Room Errors Report 12Information in the Conference Room Errors list Exporting Conference Room Errors Data Enterprise Passcode Errors Report Information in the Enterprise Passcode Errors list Network Usage Report Exporting Enterprise Passcode Errors Data Following table describes the fields in the records Exporting Network Usage Data 14 Network Usage record layout To download network usage data DMA Operations Guide Network Usage Report 430 Snmp Overview Polycom DMA System Snmp Support Snmp Versions Supported System MIB on Snmp SettingsList of Available Snmp MIBs Name Description See Snmp Versions Supported on page 432 for a Setting Description Notification Agents Notification Users Snmp Versions Supported on Add Notification User Dialog Box 3Add Notification User dialog box Edit Notification User Dialog Box Add Notification Agent Dialog Box Edit Notification Agent Dialog Box Go to Admin Local Cluster Snmp Settings Snmp ProceduresGo to Admin Snmp Settings Click Download MIBs CfgServer Polycom DMA System MIBCfgProdInfoSWExtVerPlatformVersion CfgProdInfoSWExtVerApplicationVersion Polycom DMA System MIB 444 Polycom, Inc 445 446 Polycom, Inc 447 448 Polycom, Inc 449 From SNMPv2-TC DmaConformanceDmaConformanceGroups TEXTUAL-CONVENTION, DisplayString, TruthValue, DateAndTime Initial draft Dma MODULE-IDENTITY201109220000Z Polycom, Inc Dma.2.1.1.1 CfgProductInfo Dma.2Information about the DMA product = cfgProdInfoSWExtendedVersion Syntax GeneralString MAX-ACCESS read-only Status currentGeneralString Read-only An entry in cfgInterfacesTable Not-accessible= cfgNetwork Syntax CfgInterfacesEntry Polycom, Inc 455 = cfgCsSupercluster Site topology configuration for the call server = cfgCsSiteTopology Configured territories= cfgCsTerritoriesEntry Dma.2.1.3.1.1.2.1.3 = cfgCsIntDirSvcMSActiveDirectory Dma.2.1.3.1.2.1.1.3 = cfgCsIntCalMSExchange Address of the Exchange server = cfgCsIntegrations Configurations for network integrations Polycom, Inc 461 SIP signaling configuration for the cluster Dma.2.2.1 = cfgCsSignalingDma.2.2 Current Description Contains status data for the DMA system = stIdentity Status current Description An entry in stVersionTable Syntax DisplayString MAX-ACCESS read-only Status currentDma.2.2.1.2.2 StVersionTable Sequence of StVersionEntry Server statuses = stNetwork Sequence of StNetClusterAffiliationEntry An entry in stNetPrivateInterfaceTable Syntax StNetPrivateInterfaceEntry MAX-ACCESS not-accessibleDma.2.2.1.3.2 StNetPrivateInterfaceTable OBJECT-TYPE Sequence of StNetPrivateInterfaceEntry Polycom, Inc 469 Sequence of StNetManagementInterfaceEntry = stNetManagementInterfaceEntry = stNetSignalingInterfaceEntry Dma.2.2.1.3.4.1.3 Sequence of StNetSignalingInterfaceEntryDisplayString Sequence of StRsrcCPUUsageEntry Memory usage information for the servers Sequence of StRsrcMemoryUsageEntry StRsrcMemUsageIndex Unsigned32 StRsrcMemUsageHostName = stResources= stRsrcMemoryUsageTable StRsrcMemoryUsageEntry = Sequence Swap Sequence of StRsrcSwapSpaceEntryStatus current Description stRsrcSpaceTable index Disk Syntax StRsrcDiskSpaceEntry MAX-ACCESS not-accessible= stRsrcSwapSpaceEntry Sequence of StRsrcDiskSpaceEntry An entry in stRsrcLogSpaceTable Syntax StRsrcLogSpaceEntry MAX-ACCESS not-accessible= stRsrcDiskSpaceEntry Sequence of StRsrcLogSpaceEntry Polycom, Inc 479 An entry in stMCUStatusTable Syntax StMCUStatusEntry MAX-ACCESS not-accessibleSequence of StMCUStatusEntry = stMCUs StMCUStIVRAvailable TruthValue StMCUStServiceStatus Integer = stMCUVideoPortUsageEntry Dma.2.2.2.1.3.1.3 Sequence of StMCUVideoPortUsageEntry Sequence of StMCUVoicePortUsageEntry 484 Sequence of StMCUPCConnectionStatusEntry = stMCUVoicePortUsageEntry= stMCUsPerCluster Sequence of StMCUPCReliabilityStatsEntry StMCUPCConnStConnectionStatus Integer = stMCUPCReliabilityStatsEntry Sequence of StClustersEntry HundredthsDivided Value Dma.2.2.3.2.1.3 StClClusterStatus OBJECT-TYPE Syntax StLicensesEntry MAX-ACCESS not-accessibleSequence of StLicensesEntry = stCallserver Call server status shared across the supercluster Sequence of StCsConfMgrTerritoriesEntry Name of cluster performing AD caching Failed5, outdated6, failedNoSuchEnterpriseUser7Status of Active Directory caching = stCsIntDirSvcMSActiveDirectory True if Exchange integration is enabled Syntax DateAndTime MAX-ACCESS read-only Status currentTruthValue = stCsIntCalMSExchange Status for site topology service integration Number of territories provided by the CMA system = stCsIntegrations = stCsIntNetBWMgmtJuniperSRC True if Juniper SRC integration is enabled StCsConfMgrMCUsTable index Sequence of StCsConfMgrMCUsEntry= stCsConfMgrMCUs Dma.2.2.4.2.1.2.1.1 StCsCMMCUIndex One-minute intervals Syntax Unsigned32 MAX-ACCESS read-only Status currentDma.2.3.1.1.2 UseCHMaxPartsLast60MinutesTable OBJECT-TYPE Sequence of UseCHMaxPartsLast60MinutesEntry UseCHMaxPartsLast60MinutesEntry = Sequence = useCHMaxPartsLast60MinutesTable UseCHMaxParts24HrMaxAdHocCalls Unsigned32 Sequence of UseCHMaxPartsLast24HoursEntryOne-hour intervals An entry in useCHMaxPartsLast24HoursTable UseCHMaxParts24HrMaxPCOCalls Unsigned32 UseCHMaxParts180DaysTimestamp DateAndTime Dma.2.3.1.1.6 UseCHMaxPartsLast180DaysTable OBJECT-TYPESyntax UseCHMaxPartsLast180DaysEntry = useCHMaxPartsLast180DaysTable = useCHMaxPartsLast180DaysEntry Sequence of UseConfMgrUsageEntry Dma.2.3.2.1.2 UseConfMgrUsageTable OBJECT-TYPE= useCurrentConfsConfManagerUsage Polycom, Inc 505 Sequence of UseDevRegistrationsEntry = useDevRegistrationsDevice registrations per cluster = useDevRegistrationsEntry Number of endpoints with an inactive registration status = alActiveAlertsTable Syntax AlActiveAlertsEntry MAX-ACCESS not-accessible Polycom, Inc 509 Warn1, severe2, critical3 Text= alActiveAlertsEntry Dma.2.5 DmaNotifications OBJECT-IDENTITY Status current NtfObjAlertID NtfObjAlertTimestamp NtfObjAlertCode Accessible-for-notify 512 Polycom, Inc 513 514 Polycom, Inc 515 NtfObjAlertID NtfObjAlertTimestamp Polycom, Inc 517 518 Polycom, Inc 519 520 Polycom, Inc 521 522 Polycom, Inc 523 524 Polycom, Inc 525 526 Polycom, Inc 527 CfgCallserver CfgCsSupercluster DMA Conformance CfgCsCluster CfgCsSignaling CfgCsSgnlH323 StVersionTable StVersionEntry StVerIndex StNetSignalingInterfaceTable StNetSignalingInterfaceEntryDmaConformanceStatus OBJECT-GROUP Objects DmaStatus StIdentity StHardwareInfoTable StRsrcDiskSpaceTable StRsrcDiskSpaceEntry StRsrcDiskIndex StRsrcSwapSpaceTable StRsrcSwapSpaceEntry StRsrcSwapIndex StCallserver StCsSupercluster StClustersTable StClustersEntry = dmaConformanceGroups Description Conformance group for dmaStatus 534 1.4 DmaConformanceAlerts OBJECT-GROUP Description Conformance group for dmaUsageDescription Conformance group for dmaAlerts 536 = dmaMonitoring1 Module POLYCOM-DMA-MIB MANDATORY-GROUPS 538 Index 540 Polycom, Inc Index See MCU pool orders 543 Xmpp 545 Working in system Certificates 35 Xmpp signaling