DMA OperationsGuide SNMP Settings
440 Polycom, Inc.
The Edit Notification Agent dialog box lets you enable, disable, or modify an
SNMP notification agent.
The following table describes the fields in the dialog box.
See also:
“SNMP Settings” on page 433
“Add Notification User Dialog Box” on page436
“Edit Notification User Dialog Box” on page438
“SNMP Procedures” on page441
Table 15-6 Edit Notification Agent dialog box
Setting Description
Enable agent Enables the notification agent defined below.
Clearing this check box lets you stop using this agent
without deleting it.
Transport The transport protocol for SNMP communications to the
host receiver (TCP or UDP). See “SNMP Overview” on
page431 .
Address The IP address of the host receiver (the SNMP
manager to whom this agent sends notifications).
Port Specify the port that the DMA system will use to send
notifications. By default, the DMA system uses port 162.
Notification type The type of notification that this agent sends to the
notification receiver:
•Inform — The agent sends an unsolicited message
to a notification receiver and expects/requires the
receiver to respond with a confirmation message.
Introduced with SNMP version 2c, this option is not
supported by network management systems that
only support SNMP version 1.
•Trap—The agent sends an unsolicited message to
a notification receiver and does not expect/require a
confirmation message.
SNMP version The version of SNMP supported (v2c or v3). See
“SNMP Versions Supported” on page432.
Security user For SNMPv3, the security user to receive notifications
from this agent. The list contains the names of the
security users in the Notification Users list.