Polycom 3725-76302-001LI manual Under Unauthorized prefixes, click Add

Local Cluster Configuration Procedures Local Cluster Configuration

cRepeat for each additional port on which to receive “unauthorized” or “guest” calls.

5To enable the system to receive untrusted calls (see “Untrusted SIP Call Handling Configuration” on page 73) from SIP session border controllers (SBCs) configured to add a specific prefix in the Request-URI of the INVITE message for such calls, do the following:

a Under Unauthorized prefixes, click Add.

The Add Guest Prefix dialog box opens.

bSpecify the prefix number, whether it should be stripped, and whether authentication is required. Click OK.

The new entry is added to the Unauthorized prefixes list.

cRepeat for each additional prefix used for “unauthorized” or “guest” calls.

6To enable the system’s XMPP server: a Select Enable XMPP signaling.

bIf the system’s security settings permit unencrypted XMPP connections, turn on Unencrypted XMPP port.

You must have the Administrator role to change security settings. See “Security Settings” on page 48.

cLeave the default port numbers (5222 for unencrypted XMPP, 5223 for TLS) unless you have a good reason for changing them.

7Click Update.

A dialog box informs you that the configuration has been updated.

8Click OK.

The system processes the configuration. The Status field shows the current H.323 signaling state.

9If you enabled the system to receive “unauthorized” or “guest” calls, do the following:

a Go to Admin > Call Server > Dial Rules and click in the Dial rules for unauthorized calls list to give it focus.

b Add one or more dial rules to be used for routing “unauthorized” or “guest” calls. See “Dial Rules” on page 243.

An unauthorized call rule can route calls to a conference room ID (virtual meeting room, or VMR), a virtual entry queue (VEQ), or a SIP peer.

See also:

“Signaling Settings” on page 71

Polycom, Inc. 85