Certificate Procedures

System Security

 

 

4In the Certificate Information dialog box, enter the identifying information for your Polycom DMA system (see “Certificate Information Dialog Box” on page 40) and click OK.

The Certificate Signing Request dialog box displays the encoded request (see “Certificate Signing Request Dialog Box” on page 40).

5Copy the entire contents of the Encoded Request box (including the text

-----BEGIN NEW CERTIFICATE REQUEST----- and -----END NEW CERTIFICATE REQUEST-----) and submit it to your certificate authority.

Depending on the certificate authority, your CSR may be submitted via email or by pasting into a web page.

6Click OK to close the dialog box.

When your certificate authority has processed your request, it sends you a signed public certificate for your Polycom DMA system. Some certificate authorities also send intermediate certificates and/or root certificates.

Depending on the certificate authority, these certificates may arrive as email text, email attachments, or be available on a secure web page.

The Polycom DMA system accepts PKCS#7 or PKCS#12 certificate chains or single certificates.

Caution

When you submit the CSR to your CA, make sure that the CA doesn’t modify any of the predefined SAN fields or the X.509v3 Key Usage or Extended Key Usage fields. Changes to these fields may make your system unusable. Contact Polycom technical support if you have any questions about this.

See also:

“Security Certificates Overview” on page 35 “Certificate Settings” on page 38 “Certificate Procedures” on page 42

Install a Certificate in the DMA System

The procedure below installs the certificate or certificate chain provided by the certificate authority. It assumes that you’ve received the certificate or certificate chain in one of the following forms:

A PFX, P7B, or single certificate file that you’ve saved on your computer.

Polycom, Inc.

45

Page 57
Image 57
Polycom 3725-76302-001LI manual Install a Certificate in the DMA System