Polycom 3725-76302-001LI manual Field Description Cisco Codian

DMA Operations Guide Conference Templates

Table 8-4	Edit Conference Template dialog box (continued)
Field		Description
Cisco Codian
Floor and chair control		Specifies how much control conference participants may
		have:
		• Do not allow — Participants have no control.
		• Floor only — A participant may “take the floor.”
			Everyone sees that participant’s video full-screen.
		• Floor and chair control — A participant may also
			“take the chair.” The chair can designate whose
			video everyone sees full-screen. The chair can also
			disconnect participants.
		This setting works only in H.323 conferences and only if
		H.243 Floor and Chair Control is enabled on the MCU.
		All endpoints must support H.243 chair control.
Automatic lecture mode		Enables the MCU to put a conference into lecture mode,
		either immediately or after the speaker has been talking
		for the selected interval. In lecture mode, the lecturer
		(speaker) is displayed full-screen to the other
		participants. The lecturer sees the normal continuous
		presence view.
		Available only on Codian v4.1 MCUs.
Layout control via		Enables participants to change their individual layouts
FECC/DTMF		using far end camera control, with or without fallback to
		touchtone commands for endpoints that don’t support
		FECC.
		FECC without fallback is available only on Codian v4.1
		MCUs.
Mute in-band DTMF		Specifies whether the MCU mutes participants’ in-band
		DTMF (touchtones) so that other participants don’t hear
		them:
		• When used for MCU control
		•	Always
		•	Never
		Available only on Codian v4.1 MCUs.
Allow DTMF *6 to mute		Enables conference participants to mute themselves
audio		using the *6 touchtone command.
		Available only on Codian v4.1 MCUs.

218 Polycom, Inc.