Polycom 3725-76302-001LI manual Add Dial-out Participant Dialog Box

DMA Operations Guide Users

Table 12-7Edit Conference Room dialog box (continued)

Field	Description
Audio-Only	Enables you to link this preset conference to an external
IVR Dial-out	audio conferencing bridge. Requires an RMX MCU with
	ISDN service configured.
	In the Digits field, specify the E.164 number that the RMX
	ISDN service must dial to connect to the audio conferencing
	bridge. In the IVR DTMF field, specify any DTMF digits (such
	as an access code or PIN) to send to the audio conferencing
	bridge after connecting (use p to specify a pause).
	Like the dial-outs to participants, this dial-out takes place
	when the conference starts.
	Note: If no RMX with ISDN service is available in the MCU
	pool order used by this conference room, the conference
	fails.
	Note: When the last participant leaves the VMR (that is,
	when only participants on the audio conferencing bridge
	remain), the link to the audio conferencing bridge is
	terminated and the conference ends.
Dial-out	Lists the names and URIs of the participants to be
Participants	automatically dialed when the conference starts.
	Click Add to add a participant. Click Edit or Delete to modify
	or remove the selected participant.

See also:

“Users” on page 314

“Conference Rooms Dialog Box” on page 323 “Add Dial-out Participant Dialog Box” on page 332 “Edit Dial-out Participant Dialog Box” on page 333 “Conference Rooms Procedures” on page 335

Add Dial-out Participant Dialog Box

Lets you add a participant to the conference room’s Dial-out Participants list. When someone dials into the conference room and starts a conference, the system dials out to the participants in the list.

The following table describes the parts of the Add Dial-out Participant dialog box.

332 Polycom, Inc.