Conference Templates Conference Manager Configuration
Polycom, Inc. 219
See also:
“Conference Templates” on page195
“Add Conference Template Dialog Box” on page200
“Select Layout Dialog Box” on page 219
“Conference Templates Procedures” on page220
Select Layout Dialog Box Lets you s elect a specif ic vide o frames layout when yo u’re ad ding or editing a
conference template.
To select a video frames layout
1For a Polycom RMX MCU, choose a Frame count value to see the layouts
available for that value, and then select the one you want.
2For a Cisco Codian MCU, select the layout you want.
3Click OK.
See also:
“Conference Templates” on page195
“Add Conference Template Dialog Box” on page200
“Edit Conference Template Dialog Box” on page210
“Conference Templates Procedures” on page220
Content channel video Enables the conference to support a second video
stream for content.
This setting works only if Content Status is enabled on
the MCU.
Transmitted content
resolutions Specifies the aspect ratio used for the content channel.
If Allow all resolutions is selected, endpoints with a
16:9 aspect ratio receive that, and others receive 4:3.
Available only on Codian v4.1 MCUs.
Conference custom
layout Opens the Select Layout dialog box, where you can
select the number and arrangement of video frames.
Once a layout is chosen, a small representation of it
appears here. See “Select Layout Dialog Box” on
page219 .
Table 8-4 Edit Conference Template dialog box (continued)
Field Description