Polycom 3725-76302-001LI manual = cfgCsIntDirSvcMSActiveDirectory Dma.2.1.3.1.2.1.1.3

DMA Operations Guide The Polycom DMA System MIB

cfgCsTerritoryPrimaryCluster OBJECT-TYPE

SYNTAX GeneralString MAX-ACCESS read-only

STATUS current

DESCRIPTION “Cluster assigned primary responsibility for this territory.” ::= { cfgCsTerritoriesEntry 3 }

--dma.2.1.3.1.1.2.1.4 cfgCsTerritoryBackupCluster OBJECT-TYPE

SYNTAX GeneralString MAX-ACCESS read-only

STATUS current

DESCRIPTION “Cluster assigned backup responsibility for this territory.” ::= { cfgCsTerritoriesEntry 4 }

--dma.2.1.3.1.2

cfgCsIntegrations OBJECT-IDENTITY

STATUS current

DESCRIPTION “Configurations for systems with which the DMA integrates.” ::= { cfgCsSupercluster 2 }

--dma.2.1.3.1.2.1 cfgCsIntDirectoryService OBJECT-IDENTITY

STATUS current

DESCRIPTION “Configurations for directory service integration.” ::= { cfgCsIntegrations 1 }

--dma.2.1.3.1.2.1.1

cfgCsIntDirSvcMSActiveDirectory OBJECT-IDENTITY

STATUS current

DESCRIPTION “Configuration for Microsoft Active Directory integration.” ::= { cfgCsIntDirectoryService 1 }

--dma.2.1.3.1.2.1.1.1 cfgCsIntMSADEnabled OBJECT-TYPE

SYNTAX TruthValue MAX-ACCESS read-only

STATUS current

DESCRIPTION “True if Active Directory integration is enabled.” ::= { cfgCsIntDirSvcMSActiveDirectory 1 }

--dma.2.1.3.1.2.1.1.2

cfgCsIntMSADResponsibleTerritory OBJECT-TYPE

SYNTAX	GeneralString
MAX-ACCESS	read-only
STATUS	current
DESCRIPTION	“Name of the territory responsible for Active Directory integration.”

::= { cfgCsIntDirSvcMSActiveDirectory 2 }
-- dma.2.1.3.1.2.1.1.3
458	Polycom, Inc.