Polycom 3725-76302-001LI History Retention Settings, Callserver-paris.callservers.example.com

History Retention Settings Call Server Configuration

2Go to Admin > Call Server > Embedded DNS.

3 Click Enable embedded DNS service.

4Enter the domain name of the enterprise domain for which the DMA system is to provide DNS and click Update.

5Reconfigure your endpoints to register to the correct domain name for their site.

The correct domain name is:

callserver-<site name>.<logical Call Server domain name>

For instance, if the fully qualified domain name for the logical Call Server domain is callservers.example.com, the correct domain name for endpoints in the paris site is:

callserver-paris.callservers.example.com

Note

Enter all network/DNS-related information in all lower case to avoid possible case-sensitivity issues with various devices and ensure interoperability.

See also:

“Call Server Configuration” on page 237

History Retention Settings

The following table describes the fields on the History Retention Settings page. Only users with the Auditor role can access this page.

The settings on this page are supercluster-wide (the clusters aren’t independently configured), but the values specified are the number of records to be retained on each cluster, not the total for the entire supercluster.

Table 10-26Fields on the History Retention Settings page

Field	Description
Enable recording of	Enables the system to retain Call Server registration
registration history	records (see “Registration History Report” on
	page 417).
Registration history	The number of Call Server registration records to retain
records to retain	on each cluster (up to 500,000).
Signaling message	The number of Call Server registration signaling records
records to retain	to retain on each cluster (up to 2,000,000).

Polycom, Inc. 281