Polycom 3725-76302-001LI manual Fecc/Dtmf

Conference Templates Conference Manager Configuration

Table 8-3	Add Conference Template dialog box (continued)
Field		Description
Layout control via		Enables participants to change their individual layouts
FECC/DTMF		using far end camera control, with or without fallback to
		touchtone commands for endpoints that don’t support
		FECC.
		FECC without fallback is available only on Codian v4.1
		MCUs.
Mute in-band DTMF		Specifies whether the MCU mutes participants’ in-band
		DTMF (touchtones) so that other participants don’t hear
		them:
		• When used for MCU control
		•	Always
		•	Never
		Available only on Codian v4.1 MCUs.
Allow DTMF *6 to mute		Enables conference participants to mute themselves
audio		using the *6 touchtone command.
		Available only on Codian v4.1 MCUs.
Content channel video		Enables the conference to support a second video
		stream for content.
		This setting works only if Content Status is enabled on
		the MCU.
Transmitted content		Specifies the aspect ratio used for the content channel.
resolutions		If Allow all resolutions is selected, endpoints with a
		16:9 aspect ratio receive that, and others receive 4:3.
		Available only on Codian v4.1 MCUs.
Conference custom		Opens the Select Layout dialog box, where you can
layout		select the number and arrangement of video frames.
		Once a layout is chosen, a small representation of it
		appears here. See “Select Layout Dialog Box” on
		page 219.

See also:

“Conference Templates” on page 195

“Edit Conference Template Dialog Box” on page 210 “Select Layout Dialog Box” on page 219 “Conference Templates Procedures” on page 220

Polycom, Inc. 209