Polycom 3725-76302-001LI manual Script Debugging Dialog Box for Preliminaries/Postliminaries

Preliminary/Postliminary Scripting Call Server Configuration

Script Debugging Dialog Box for Preliminaries/Postliminaries

The Script Debugging dialog box lets you test a Javascript executable script that you’ve added as preliminary to a dial rule or as a postliminary for an external gatekeeper, SIP peer, SBC, or MCU. It lets you specify parameters of a call and the dial string, and see what effect the script has on the dial string.

The following table describes the fields in the Script Debugging dialog box. Table 10-12Script Debugging dialog box

Field	Description
Dial string	This is the DIAL_STRING variable in the script, which is
	initially set to the dial string being evaluated. Enter a dial
	string to test. Alternatively, provide the entire SIP
	INVITE message. Then click Execute Script.
	Note: For SIP, the script should always specify the
	schema prefix (sip or sips). For instance:
	DIAL_STRING = "sip:xxx@10.33.120.58"
Caller site	Select a site in order to set the first four caller variables.
Caller variables	Lists variables that can be used in the script to
	represent caller alias values. Enter an alias value to test
	for that variable.
Final result	Displays the outcome of running the script.
	For a dial rule preliminary, if the script rejected the dial
	string (skipping the dial rule action and passing it on to
	the next dial rule), a message tells you so. Otherwise,
	the transformed dial string is displayed.
Script output	Displays any output produced by the script (e.g.,
	println statements).
Output SIP headers	For an external SIP peer’s postliminary, displays the
	headers produced by the script.

See also:

“Preliminary/Postliminary Scripting” on page 254 “Sample Preliminary and Postliminary Scripts” on page 258

Polycom, Inc. 257