Polycom 3725-76302-001LI manual Telepresence mode is Yes

Conference Templates Conference Manager Configuration

Table 8-4	Edit Conference Template dialog box (continued)
Field		Description
Lecturer view switching		When in lecture mode, enables the lecturer’s view to
		automatically switch among participants (if the number
		exceeds the number of windows in the layout) while the
		lecturer is talking.
		Not available if Same layout is selected or
		Telepresence mode is Yes.
Auto layout		Lets the system select the video layout based on the
		number of participants in conference. Clear the check
		box to select a specific layout (below).
		Not available if Video switching is on or Telepresence
		mode is Yes.
Layout		With Auto layout deselected, this opens the Select
		Layout dialog box, where you can select the number
		and arrangement of video frames. Once a layout is
		chosen, a small representation of it appears here. See
		“Select Layout Dialog Box” on page 219.
		Not available if Video switching is on.
Telepresence mode		Support for telepresence conference rooms joining the
		conference:
		• Auto (default) — A conference is automatically put
		into telepresence mode when a telepresence
		endpoint (RPX, TPX, ATX, or OTX) joins.
		• Yes — Telepresence mode is on, regardless of
		whether a telepresence endpoint is present.
		• No — Telepresence mode is off, regardless of
		whether a telepresence endpoint is present.
		Available only on RMX v. 6.0 or later MCUs that are
		licensed for telepresence mode. We recommend always
		using Auto.
		Note: The RMX system flag ITP_CERTIFICATION must
		be set to YES. See the information about manually
		added system flags in the Polycom RMX Administrator’s
		Guide.

Polycom, Inc. 215