Polycom 3725-76302-001LI manual Add Site Dialog Box, Subnets, Bandwidth Settings

Sites Site Topology

Table 11-2Site Information dialog box (continued)

Field	Description
VBPs	The number of Polycom Video Border Proxy
	NAT/firewall traversal appliances in the site.
Endpoints	The number of registered endpoints in the site.
Subnets	A list of the subnets in the site.

See also:

“About Site Topology” on page 283 “Sites” on page 285

Add Site Dialog Box

Lets you define a new site in the Polycom DMA system’s site topology and specify which subnets are associated with it. The following table describes the fields in the dialog box.

Table 11-3Add Site dialog box

	Field	Description
	General Info
	General Settings
	Site name	A meaningful name for the site (up to 128 characters).
	Description	A brief description of the site (up to 200 characters).
	Bandwidth Settings
	Max bandwidth	The total bandwidth limit for voice and video calls. If not
	(Mbps)	selected, voice and video calls can use all of the
		available bandwidth.
		This setting lets you restrict voice and video calls to only
		a portion of the available bandwidth, ensuring that some
		bandwidth always remains available for other network
		traffic.
	Max bit rate (kbps)	The per-call bit rate limit for voice and video calls.
		Note: Bit rate is not the same as bandwidth. Since the
		bit rate applies in both directions and there is overhead,
		the actual bandwidth consumed is about 2.5 times the
		bit rate selected.
		When you specify both the bandwidth and bit rate limits,
		the dialog box shows you how many calls at that bit rate
		the specified bandwidth limit supports.
Polycom, Inc.		287