Introduction to the Polycom DMA System

Polycom® DMA7000 System Overview

System Capabilities and Constraints

The following capabilities and constraints apply to the entire supercluster:

Number of sites: 500

Number of clusters in a supercluster: 5 (not counting an integrated Polycom RealPresence Resource Manager or CMA system)

Number of MCUs enabled for conference rooms: 64

Number of territories enabled for conference rooms (Conference Manager enabled): 3

Number of concurrent VMR calls: 1200 per territory (Conference Manager), up to 3600 total

Size of Active Directory supported: 1,000,000 users and 1,000,000 groups (up to 10,000 groups may be imported)

The following capabilities and constraints apply to each cluster in the supercluster:

Number of registrations: 15000

Number of concurrent H.323 calls: 5000

Number of concurrent SIP calls: 5000

Total number of concurrent calls: 5000

Number of network usage data points retained: 8,000,000

Number of IRQ messages sent per second: 100

System Port Usage

The table below lists the inbound ports that may be open on the Polycom DMA system, depending on signaling and security settings, integrations, and system configuration.

Table 1-1Inbound port usage

 

Port

Protocol

Description

 

 

 

 

 

22

TCP

SSH. Only available if Linux console

 

 

 

access is enabled (see “Security Settings”

 

 

 

on page 48).

 

 

 

 

 

80

TCP

HTTP. Redirects to 443 (HTTP access is

 

 

 

not allowed). Disabled in maximum

 

 

 

security mode.

 

 

 

 

 

443

TCP

HTTPS. Redirects to 8443.

 

 

 

 

 

1718

UDP

H.323 RAS. Default port; can be changed

 

 

 

(see “Signaling Settings” on page 71).

 

 

 

 

Polycom, Inc.

 

7

Page 19
Image 19
Polycom 3725-76302-001LI manual System Capabilities and Constraints, System Port Usage, Port Protocol Description