Polycom 3725-76302-001LI manual To edit an MCU

DMA Operations Guide MCUs

7If the MCU is configured as a conferencing resource, add it to the desired MCU pool(s). See “MCU Pools” on page 152.

The pool(s) to which the MCU belongs, and the pool order(s) to which a pool belongs, are used to determine which MCU is used for a conference. See “MCU Pool Orders” on page 156.

To edit an MCU

1On the Dashboard, determine whether there are existing calls and conferences on the MCU you want to edit.

2Go to Network > MCU > MCUs.

3In the MCUs list, select the MCU of interest. If the MCU is being used as a conferencing resource, do the following:

a In the Actions list, select Busy Out. When prompted, confirm.

bWait for any existing calls and conferences to finish. 4 In the Actions list, click Edit.

5In the Edit MCU dialog box, edit the fields as required. See “Edit MCU Dialog Box” on page 142.

6To set aside more or fewer ports for the Polycom CMA system’s use, change the Video ports reserved for CMA system and Voice ports reserved for CMA system values (requires RMX v6.0 and above).

Note

This feature is not for use with a Polycom RealPresence Resource Manager system. The RealPresence Resource Manager system must have exclusive use of any MCUs on which it directly schedules conferences. Those MCUs should not be added to the DMA system’s conferencing resources.

7To use a gateway-capable MCU as an ISDN gateway, select the Enable gateway profiles check box and, on the Gateway Profiles tab, specify a dial string delimiter and add or change session profiles. To stop using it, clear the Enable gateway profiles check box.

8Click OK.

The changes you made appear in the MCUs list.

9If the MCU is configured as a conferencing resource, optionally change the MCU pool(s) to which it’s assigned. See “MCU Pools” on page 152.

The pool(s) to which the MCU belongs, and the pool order(s) to which a pool belongs, are used to determine which MCU is used for a conference. See “MCU Pool Orders” on page 156.

150 Polycom, Inc.