Polycom 3725-76302-001LI manual Epversion

DMA Operations Guide Registration Policy Scripting

Table 10-20Predefined variables for registration policy scripts (continued)

Variable	Initial value
EP_SIP_TEL_URI_ALIAS	Endpoint alias value associated with SIP
	TEL: URI or blank.
	This is an array that can contain multiple
	values. Separate the values with commas.
EP_VERSION	Endpoint software version number.
REG_IS_PERMANENT	“TRUE” if endpoint is already permanently
	registered. Blank otherwise.
REG_SITE_AREA_CODE	Area code of the site where the endpoint is
	attempting to register.
REG_SITE_COUNTRY_CODE	Country code of the site where the endpoint
	is attempting to register.
REG_SITE_DIGITS	Number of digits in the subscriber number
	configured for the site where the endpoint is
	attempting to register.
REG_SITE_NAME	Site where endpoint is attempting to register.
REG_SUBNET_IP_ADDRESS	IP address of the subnet where the endpoint
	is attempting to register. Enter it here in
	normal dot or colon notation (such as 1.2.3.4
	for IPv4).
	In the script, this is represented as an array.
	If the IP address is IPv4, there are 4
	elements in the array. If the IP address is
	IPv6, there are 8 elements in the array.
REG_SUBNET_MASK	IP mask of the subnet where the endpoint is
	attempting to register. Enter it here in normal
	dot or colon notation (such as 1.2.3.4 for
	IPv4).
	In the script, this is represented as an array.
	If the IP address is IPv4, there are 4
	elements in the array. If the IP address is
	IPv6, there are 8 elements in the array.

See also:

“Registration Policy” on page 268

“Script Debugging Dialog Box for Registration Policy Scripts” on page 273 “Sample Registration Policy Scripts” on page 273

272 Polycom, Inc.