Matsushita CF-29N3LGZBM manual Setting the Speaker, Attaching the Memory Heat Plate

■Attaching the Memory Heat Plate

Memory Heat Plate

IC 0~1mm

0~1mm

7.2.14. Setting the Speaker

1.Set the MP Eject Slide Ass’y to the Bottom Cover.

2.Fix the MP Eject BOUSUI Plate using the Screw<P>.

3.Fix the MP Eject Lever using the four Screws<O>.

4.Fix the Heat Pipe Unit Bottom using the two Screws<N>.

5.Fix the three Speaker Angles to the Speaker using the three Adhesive Tapes.

6.Attach the Speaker Spacer to the Speaker.

7.Attach the CPU Heatsink Rubber and the LAN Heat Plate Spacer to the LAN Heat Plate.

8.Fix the Speaker and the LAN Heat Plate using the four Screws<M>.

9.Attach the Radiation Rubber, Coil Cooling Sheet and the LCD Lamp Sheet to the LAN Heat Plate.

Screws <M>: DXQT26+D4NLT

Screws <N>: DXYN+J6FNL

Screws <O>: DXYN26+F5NLT

Screw <P>: DXQT26+D4NLT

		LCD Lamp Sheet
		Coil Cooling Sheet	Radiation
		LAN Heat <M>	Rubber
	<N>		<M>
		Plate
Heat Pipe Unit	<N>
Bottom		CPU Heatsink
		Rubber
		LAN Heat
		Plate Spacer
		MP Eject
<O>		BOUSUI	<M>
		Plate
<O>	<O>		<M>
<O>		MP Eject
		<P> Spring
MP Eject			Speaker
Lever			Angle
			Adhesive
MP Eject Slide Ass’y			Tape
DIMM Stopper
Sheet
		Speaker	Speaker
			Spacer

Bottom Cover

7-32