Matsushita CF-29N3LGZBM manual Self Diagnosis Test

5 Self Diagnosis Test

1.Floppy disk is included for the self-diagnostic tests that should be performed before using this product.

2.Connect External Floppy Disk Drive (FDD) to USB port for diagnosis test.

Important notice

System password

This product has a password function. If this function is turned on, the self-diagnostics tests will not work. You will need ask the user for the password before performing the self-diagnostics.

5.1. Outline of Self Diagnostic Tests

Insert the diagnostics floppy disk

Return the setup contents to default

Starting up the setup utility

Turn on the power.

When "Panasonic Press F2 to enter setup" appears on the screen, press F2.

Press " " to select [ Exit ]

Press " " to select [ Get default value ]

Press Enter.

Choose Yes for "Load default Configuration now?"

Select "Save Values & Exit" and press Enter.

Choose Yes for "Save Configuration changes and exit now?" and press Enter.

Choose test from the menu screen to start the test.

Caution:

After completing repairs, be sure to carry out the Automatic test and Peripheraltest.

Menu Screen

1.DIAG on FD

2.LAN test

3.Modem test

4.Wireless LAN test (Wireless LAN Model only)

5.CD test

Q. Quit

<Automatic test>	<Peripheral test>	<Test selection>
Tests selected (O) from the test	The parallel devices can be tested.	Specifc tests required can
item list will be performed in		be freely selected and
succession.	2. LAN test	performed from the test item
1. DIAG on FD	3. Modem test	list.
	4. Wireless LAN test	Be sure to carry out the Selection
	(Wireless LAN Model only)
	5. CD test	test only when necessary.

Problems in the unit are located and divided according to error messages that occur during testing.

5-1