Matsushita CF-29N3LGZBM manual Setting the KBD PCB, MDC Modem and LCD Cable/MIC Frame

7.2.16. Setting the KBD PCB, MDC Modem and LCD Cable/MIC Frame

1.Connect the three Cables to the three Connectors (CN930, CN950, CN952) on the KBD PCB.

2.Fix the KBD PCB using the two Screws<H>. No1, No2

3.Connect the Cable to the Connector (J2) on the MDC Modem.

4.Attach the Sheet to the MDC Modem.

5.Fix the MDC Modem using the two Screws<I>. No3, No4

6.Attach the LCD Conductive Sheet and the Gasket to the LCD Cable/MIC Frame.

7.Set the LCD Cable/MIC Frame to the Top Cabinet.

Note:

	Connector J1
Connector CN950 (reverse side)
(front side)		<I>
<H>	Connector CN952 :No3		<I>	Sheet
			:No4
<H> :No1	(reverse side)
:No2				MDC
				Modem
	Connector CN930		Connector J2		Gasket
			(reverse side)
	(reverse side)
			to Connector
KBD PCB
			(CN950)

to Connector (CN952)

Tighten the Screws in the numbered order (No1 to No4).

Screws <H>: DFHE5025XA

Screws <I>: DFHE5025XA

Top Cabinet

to Connector (CN930)

LCD Conductive

Sheet

LCD Cable/

MIC Frame

to Connector (J2)

Place the Cable not to pass through this range.

■Attaching the Sheet to the MDC Modem

1.Connect the Cable to the Connector (J2) on the MDC Modem.

2.Attach the Sheet to the MDC Modem.

Safety Working

MDC Modem MDC Modem

View "A"

Connector (J2) Connector (J2) Sheet

Cable

Cable

View "A"

5~7mm

Sheet

3~4mm

7-34