Matsushita CF-29N3LGZBM Removing the Battery Pack, HDD Pack and FDD Pack, Removing the HDD, Hdd

7 Disassembly/Reassembly

Note:

Power off the computer. Do not shut down to the Suspend or hibernation mode.

Do not add peripherals while the computer is in the Suspend or hibernation mode; abnormal operation may result.

7.1.Disassembly Instructions

7.1.1.Preparation

Before disassembling, be sure to make the following prepara- tions.

•Shut down Windows and turn off the power.

•Disconnect the AC adaptor.

•Remove the optional DIMM memory card and PCMCIA card if they are connected.

•Remove other devices if they are connected.

Attention:

•Please execute writing BIOS ID when you exchange the Main Board.

•You cannot reuse the Conductive Clothes and the heat dissi- pating parts such as Sheet and Rubber. Use new parts.

7.1.2.Removing the Battery Pack, HDD Pack and FDD Pack

MP

Cover

Battery

Cover

1.Open the Battery Cover.

2.Remove the Battery Pack.

3.Open the HDD Cover.

4.Remove the HDD Pack.

5.Open the FDD Cover.

6.Remove the FDD Pack. Use the MP Eject Lever.

7.1.3.Removing the HDD

HDD FPC

HDD

Heater Sheet

Sheet Sheet

<A>

Heater

Tab

HDD U Case Ass’y

<A>

HDD

Damper

Ass’y

Tab

HDD Case

Ass’y

HDD Cover

FDD Pack

Battery Pack

1.Remove the four Screws<A>.

2.Release the two Tabs, and remove the HDD U Case Ass’y and the HDD L Case Ass’y.

3.Remove the HDD Damper Ass’y.

4.Remove the two Sheets.

5.Remove the Heater and the Heater Sheet.

6.Remove the HDD FPC.

Screws <A>: DFHE5025XA

MP RELEASE

HDD Pack

Figure 1

7-1