Matsushita CF-29N3LGZBM manual No4

7.2.11.Setting the Main PCB, EXT Antenna PCB, PCMCIA Unit and RTC Battery

1.Connect the Cable the Connector (CN4) on the Main PCB, and Attach the RTC Battery.

2.Fix the PCMCIA to the Main PCB using the Screws<T-2>. No1 to No4

3.Connect the six Cables to the six Connectors. (Main PCB: CN6, CN9, CN10, CN51, CN54) (EXT Antenna PCB: CN1)

4.Fix the Main PCB using the three Screws<V>. No5 to No7

5.Fix the Main PCB using the two Screws<T-1>. No8, No9

6.Fix the Main PCB using the two Screws<S>. No10, No11

7.Fix the Main PCB using the Screw<W>. No12

8.Fix the Main PCB using the two Screw<X>. No13, No14

9.Fix the EXT Antenna PCB using the two Screws<U>. No15, No16

Note:

Tighten the Screws in the numbered order (No1 to No16).

Screws <S>: DFHM5054XA

Screws <T-1>:DFHE5025XA

Screws <T-2>:DFHE5025XA

Screws <U>: DRQT2+G6FKL

Screws <V>: DRHM5104ZA

Screw <W>: DFHE5025ZA

Screw <X>: DRHM5117ZA

			EXT Antenna PCB
		<T-2>	Connector
		:No1
	<T-2>		CN1
	:No4	<T-1>	<S>	Connector CN6
				(reverse side)
	<S>	:No9	:No10
Connector CN51	:No11			Connector CN9
(front side)
<T-2>				(reverse side)
:No3
Main PCB
	<T-2>
	:No2			<T-1>
		<W>
				:No8
Connector CN54		:No12
(reverse side)			Connector CN10
Connector CN4			(front side)
(reverse side)		Connector CN1
PCMCIA Unit
		(reverse side)

	to Connector		to Connector
	(CN4)		(EXT Antenna CN1)
		to Connector		<U>
		(CN9)	to Connector
RTC Battery				:No16 <U>
to Connector			(CN6)	:No15
(CN950)	to Connector			<V>
<X>	(CN51)
				:No7<V>
<X> :No13				:No5
:No14				<V>
				:No6

to Connector (CN54)

to Connector

(CN10)

to Connector (Main PCB CN1)

7-25