Matsushita CF-29N3LGZBM manual Pad Sw Ffc

7.1.10. Removing the PAD SW FFC Cover	7.1.11. Removing Main PCB, EXT Antenna
<R>	PCB, PCMCIA Unit and RTC Battery
<R>			EXT Antenna PCB
PAD SW FFC		<T-2>	Connector
Cover
<R>		<T-2>	CN1
			Connector CN6
		<S>
			(reverse side)
		<T-1>	Connector CN9
	Connector CN51	<S>	(reverse side)
	(front side)
Power Cable	<T-2>
	Main PCB
Guard		<T-2>
	Connector CN54	<W>	<T-1>
	(reverse side)
	Connector CN4		Connector CN10
	(reverse side)
			(front side)
	PCMCIA Unit	Connector CN1
		(reverse side)

Figure 9

1.Remove the three Screws<R>, and remove the PAD SW FFC Cover.

Screws <R>: DFHE5054XA

				to Connector
				(EXT Antenna CN1)
to Connector			to Connector
			(CN9)	to Connector
(CN4)	RTC Battery
	to Connector			(CN6)
				<U>
	(CN950)	to Connector
	<X>	(CN51)		<U><V>
<X>				<V>
				<V>

to Connector (CN54)

to Connector

(CN10)

to Connector (Main PCB CN1)

Figure 10

1.Remove the two Screws<S>.

2.Remove the two Screws<T-1>.

3.Remove the two Screws<U>.

4.Remove the four Screws<V>.

5.Remove the Screw<W>.

6.Remove the two Screws<X>.

7.Disconnect the six Cables from six Connectors. (Main PCB: CN1, CN6, CN9, CN10, CN51, CN54) (EXT Antenna: CN1)

8.Remove the EXT Antenna.

9.Remove the Main PCB.

10.Disconnect the Cable from Connector (CN4).

11.Remove the RTC Battery

12.Remove the four Screws<T-2>, and remove the PCMCIA Unit.

7-5