Dell 2400 manual 10.Removing the Feet,  
 




plastic screws (4)

rubber feet (4)

Figure 1-10. Removing the Feet

3.From the outside of the chassis, pry each foot from the chassis.

4.Turn the computer over and lay it on the bottom side.

5.Remove the front bezel and the left- and right-side computer covers.

See Chapter 7, “Checking Inside the Computer,” in the computer’s Installation and Troubleshooting Guide for instructions on removing the bezel and computer covers.

6.Remove the two screws at the front edge of the top cover (see Figure 1-11). (Retain the screws for later use.)

7.Slide the top cover about one-half of an inch toward the front of the computer, and lift it away.

1-12 Dell PowerEdge 2400 Systems Rack Installation Guide