Dell 2400 manual 13.Installing the Computer in the Rack, back latch green middle latch yellow

3.Tilt the computer while aligning the back shoulder screws on the top and the bottom of the computer with the back rail slots on the slide assemblies.

WARNING: Make sure that the server shoulder screws are securely engaged in the slots.

4.Engage the back shoulder screws in the slot behind the back (green) latch first fol- lowed by the middle shoulder screw in the slot near the middle (yellow) latch. Finally, engage the front shoulder screw in the front slot.

5.Push the chassis inward until the middle (yellow) latch is engaged (see Figure 1-13).

back latch (green)

middle latch (yellow)

Figure 1-13. Installing the Computer in the Rack

support.dell.com Dell PowerEdge 2400 Systems Rack Installation Guide 1-15