24 | Replacing the Speakers
Replacing the Speakers
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1Using the alignment posts, place the speakers on the palm-rest assembly.
2Connect the speakers cable to the system board.
3Route the speaker cable through the routing guides on the palm-rest assembly.
4Slide the touchpad cable into the touchpad-cable connector and press the latch to
secure the cable.
Postrequisites
1Replace the battery. See "Replacing the Battery" on page 13.
2Replace the base cover. See "Replacing the Base Cover" on page 11.