Dell 350 manual Removing the I/O Panel, Replacing the I/O Panel

Back to Contents Page

I/O Panel

Dell Precision™ Workstation 350 Service Manual

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the System Information Guide.

Removing the I/O Panel

1internal speaker cable

2	chassis intrusion switch cable
3	I/O panel
4	mounting screw
5	control-panel cable
6	front audio cable
7	I/O cable

1.Disconnect the control-panel cable from the control-panel connector on the I/O panel. Disconnect the I/O cable from the I/O panel.

Note the routing of the control-panel cable as you remove it from the computer so that you can replace it correctly.

2.Remove all cables that are connected to the I/O panel, such as the chassis intrusion switch and internal speaker cables.

3.From inside the chassis cover, remove the mounting screw that secures the I/O panel to the chassis.

4.Remove the I/O panel from the chassis.

Replacing the I/O Panel

To replace the I/O panel, follow the removal procedures in reverse order.

Back to Contents Page