Dell 350 manual Front-PanelInserts, Removing a Floppy Drive

Front-Panel Inserts

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the System Information Guide.

If you are installing a new floppy or CD/DVD drive rather than replacing a drive, remove the front-panel inserts.

1.Open the computer cover to a 90-degree angle and release the insert tabs from inside the computer.

2.Press on the insert until it pops free of the front panel cover.

Removing a Floppy Drive

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the System Information Guide.

1.Disconnect the power and floppy-drive cables from the back of the floppy drive.

2.Disconnect the other end of the floppy-drive cable from the system board (labeled FLOPPY).