Using Your Projector 41
NETWORK—Select On to activate network connection. Select Off to disable
network connection. Press to activate Network menu. See "NETWORK" on
page41.
NETWORKThe Network menu allows you to configure the network connection settings.
DHCP—If a DHCP server exists in the network to which the projector is
connected, the IP address will automatically be acquired when you select DHCP
On. If DHCP is Off, manually set the IP Address, Subnet Mask, and Gateway. Use
to select the number of IP Address, Subnet Mask, and Gateway. Key in
Enter to confirm each number and then use to set the next item.
IP ADDRESS—Automatically or manually assigns the IP address to the projector
connected to the network.
SUBNET MASK—Configure the Subnet Mask of the network connection.
GATEWAY—Check the Gateway address with your network/system administrator if
you configure it manually.
DNS—Check the DNS Server IP address with your network/system administrator
if you configure it manually.
STORE—Press to save the changes made in network configuration settings.
RESET NETWORK—Select Yes to reset network configuration.