28 Using Your Projector
4Up / Keystone
adjustment Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+40/-35 degrees).
5Right / Auto Adjust Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to synchronize the projector to the input
source.
NOTE: Auto Adjust does not operate if the
on-screen display (OSD) is displayed.
6IR Receiver Point the remote control towards the IR receiver
and press a button.
7Down / Keystone
adjustment Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+40/-35 degrees).
8Menu Press to activate the OSD. Use the directional
keys and the Menu button to navig ate through
the OSD.
9Left / Source Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to toggle through Analog RGB, Composite,
Component (YPbPr via VGA), HDMI, and S-
video sources when multiple sources are
connected to the projector.
10 Enter Press to confirm the selection item.