Removing the Network Connector
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a)SD memory card
b)ExpressCard
c)battery
d)access panel
e)keyboard trim
f)keyboard
g)optical drive
h)hard drive
i)WLAN card
j)right base panel
k)thermal module
l)palmrest
m)ExpressCard reader cage
n)display assembly
o)right support frame
p)left support frame
q)modem card
r)system board
3.Remove the network connector cables from the routing channels.
4.Remove the network connector.
Installing the Network Connector
1.Install the network connector in the computer.
2.Thread the network connector cable in the routing channel.
54
