Option | Description | |
|
| |
Wireless Radio Control | Allows you to enable or disable the feature that automatically switches | |
| from wired or wireless networks without depending on the physical | |
| connection. | |
| • | Control WLAN Radio |
| • | Control WWAN Radio |
| • Default Setting: Control WLAN radio or Control WWAN radio is not | |
|
| selected |
Wake on LAN/WLAN | Allows you to enable or disable the feature that powers on the computer | |
| from the Off state when triggered by a LAN signal. | |
| • Disabled: This option is enabled by default | |
| • | LAN Only |
| • | WLAN Only |
| • | LAN or WLAN |
Block Sleep | This option lets you block entering to sleep (S3 state) in Operating | |
| System environment. | |
| Block Sleep (S3 state) - This option is disabled by default. POST | |
Primary Battery | Allows you to select the charging mode for the battery. The options are: | |
Configuration | • | Standard Charge |
| ||
| • | Express Charge |
| • | Predominately AC use |
| • Auto Charge: This option is enabled by default. | |
| • | Custom Charge |
| If Custom Charge is selected, you can also configure Custom Charge | |
| Start and Custom Charge Stop. | |
|
| NOTE: All charging modes may not be available for all the batteries. |
Battery Slice Configuration | Allows you to select the type of charge for the battery. The options are: | |
| • | Standard Charge |
| • Express Charge : This option is enabled by default. | |
|
| NOTE: Express charge may not be available for all the batteries. |
Table 21. POST Behavior |
|
|
|
| |
Option | Description | |
|
| |
Adapter Warnings | Allows you to enable or disable the system setup (BIOS) warning | |
| messages when you use certain power adapters. | |
| Default Setting: Enable Adapter Warnings | |
Keypad | Allows you to choose one of two methods to enable the keypad that is | |
| embedded in the internal keyboard. | |
• Fn Key Only: This option is enabled by default.
73
