support.del l.com Dell PowerEdge6300and 4x00SystemsSCSI BackplaneOption 1-3
Figure 1-1. Removing a S CSI Backplane Board
12. Install the new backplaneboard:
a. Whileholding the backplaneboard by its edges, position the board so that
thet abs on the computer chassiswall fit through the corresponding slots in
thebackplane board.
b. Slidet he backplaneboard toward the power-supply paralleling board (PSPB).
c. Secure the backplaneboard by tightening the captive screw.
13. Connect the 20-pin data cable leading from the system board to the connector
labeled"PLANAR" on the backplane board (see Figure 1-2).
1Thumbscrew
2SCSIbackplane board