8 Dell PowerEdge 4x00 and 6x00 Systems Rack Installation Guide
3. Turn the template over and place the back of the template over the front side of
the back rack rails in the same position as you placed it on the front rack rail.
4. Mark the upper- and lower-mounting positions for the slide brackets as shown on
the template.
After determining where to install the PowerEdge system, mark the racks front and
back vertical rails with a felt-tipped marker or masking tape where the systems lower
edge will be located.
)LJXUH'HWHUPLQLQJ:KHUHWR,QVWDOOWKH6OLGH$VVHPEOLHV
12.25 inches
12.25 inches
7 U (12.25 inches) between
slide assemblies (drawing
is not to scale)
template