Dell 6x00, 4x00 manual HOOŒ3RZHUGJHŒDQG 6\VWHPV5DFN,QVWDOODWLRQ *XLGH

'HOOŒ￿3RZHU(GJHŒ￿￿[￿￿￿DQG￿ ￿[￿￿￿6\VWHPV￿5DFN￿,QVWDOODWLRQ￿ *XLGH

This installation guide provides instructions for trained service technicians installing one or more Dell PowerEdge 4x00 and 6x00 computer systems in a Dell rack. One rack kit is required for each PowerEdge system to be installed in the rack. The rack kit includes the following items (see Figure 1):

‡One pair of slide assemblies with mounting brackets*

‡Six rails*

‡Two rack adapters

‡One cable-management arm

‡One cable tray

‡One cage-nut installation tool

‡Nine 10-32 x 0.5-inch pan-head Phillips-head screws*

‡Thirty-three 10-32 x 0.25-inch pan-head Phillips-head screws*

‡Five 6-32 x 0.25-inch pan-head Phillips-head screws

‡Two 10-32 cage nuts*

*If you purchased a Dell rack with your PowerEdge system, some of the hardware may be pre- installed in the rack.

NOTE: The nonmetric screws called out in illustrations and referenced in procedural steps are identified first by size and then by the number of threads per inch. For exam- ple, a #10 Phillips-head screw with 32 threads per inch is identified as a 10-32 screw.

Dell PowerEdge4x00 and 6x00 Systems Rack Installation Guide 1