Dell 540 Configuring Your Computer After Removing or Installing a PCI/PCI Express Card

Replace the card retention bracket ensuring that:
lThe guide clamp is aligned with the guide notch.
lThe tops of all cards and filler brackets are flush with the alignment bar.
lThe notch in the top of the card or filler bracket fits around the alignment guide.
Configuring Your Computer After Removing or Installing a PCI/PCI Express Card
Back to Contents Page

1
alignment guide
2
filler bracket
3
alignment bar
4
card retention bracket
5
guide clamps (2)
6
guide notchs (2)
NOTE: For information on location of connectors, see the Setup Guide. For information on installing drivers and software for your card, see the
documentation that shipped with the card.

Installed
Removed
Sound Card
1. Enter system setup (see System Setup).
2. Go to Integrated Peripherals and select Onboard Audio Controller, and then
change the setting to Disabled.
3. Connect the external audio devices to the sound card's connectors.
1. Enter system setup (see System Setup).
2. Go to Integrated Peripherals and select
Onboard Audio Controller
change the setting to Enabled.
3. 
Connect the external audio devices to the computer's back panel connectors.
Network
Card
1. Enter system setup (see System Setup).
2. Go to Integrated Peripherals and select Onboard LAN Controller, and then
change the setting to Disabled.
3. Connect the network cable to the network card's connector.
1. Enter system setup (see System Setup).
2. Go to Integrated Peripherals and select
Onboard LAN Controller
change the setting to Enabled.
3. 
Connect the network cable to the integrated network connector.