Dell 5423 owner manual Replacing the Wireless Mini-Card

16 Replacing the Wireless Mini-Card

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 7. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance.

Procedure

CAUTION: To avoid damage to the mini-card, ensure that no cables are placed under the wireless mini-card.

1Align the notch on the Mini-Card with the tab on the system-board connector.

2Insert the Mini-Card connector at a 45-degree angle into the connector on the system board.

3Press the other end of the Mini-Card down into the slot on the system board and replace the screw that secures the Mini-Card to the system board.

4Connect the antenna cables to the Mini-Card.

The following table provides the antenna cable color schemes for the Mini-Card supported by your computer.

Connectors on the mini-card	Antenna cable color schemes
WLAN + Bluetooth (2 cables)
Main WLAN + Bluetooth (white triangle)	white

Auxiliary WLAN + Bluetooth (black triangle) black

Replacing the Wireless Mini-Card 41